Re: Trouble booting 9.2 on Alpha Jensen
Istvan Gyenes <[email protected]> Sun, 26 Dec 2021 11:12:23 +0100
| Newsgroups | gmane.os.netbsd.ports.alpha |
|---|---|
| Message-ID | <[email protected]> |
Hello Nigel, The IRQ bug only fixed in -current, so you should try http://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/202112251840Z/images/NetBSD-9.99.93-alpha.iso -- istvan On 2021. 12. 25. 1:13, Nigel Johnson wrote: > > Hi, I'm new to this group but have been on NetBSD-VAX for quite som etime. > > I have an Alpha with VMS on it, bit am trying to get NetBSD running so > as to be able to use a SCSI disk that somebody gave me. > > The disk is 77GB and won't format under VMS. It tries to then gets > all sorts of errors due to misreading the geometry, I guess. > > I downloaded and dd'ed an ISO and it starts to boot in the CD of the > Alpha, but hangs after accessing the floppy: > > >>> boo dka400 > INIT-S-CPU... > AUDIT_BOOT_STARTS ... > AUDIT_CHECKSUM_GOOD > AUDIT_LOAD_BEGINS > AUDIT_LOAD_DONE > > > NetBSD/alpha 9.2 ISO 9660 Primary Bootstrap > Jumping to entry point... > > NetBSD/alpha 9.2 Secondary Bootstrap, Revision 1.13 (Wed May 12 > 13:15:55 UTC 2021) > > VMS PAL rev: 0x100010530 > OSF PAL rev: 0x20123 > Switch to OSF PAL code succeeded. > > Boot flags: 0,0 > 11014768+206128=0xab3d90 > > Entering netbsd at 0xfffffc0000a011a0... > [ 1.0000000] Unrecognized boot flag '0'. > [ 1.0000000] Unrecognized boot flag ','. > [ 1.0000000] Unrecognized boot flag '0'. > [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, > 2003, 2004, 2005, > [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, > 2014, 2015, 2016, 2017, > [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All > rights reserved. > [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 > [ 1.0000000] The Regents of the University of California. All > rights reserved. > > [ 1.0000000] NetBSD 9.2 (INSTALL) #0: Wed May 12 13:15:55 UTC 2021 > [ 1.0000000] > [email protected]:/usr/src/sys/arch/alpha/compile/INSTALL > [ 1.0000000] DEC2000 model 300, 150MHz, s/n > [ 1.0000000] 8192 byte page size, 1 processor. > [ 1.0000000] total memory = 256 MB > [ 1.0000000] (2048 KB reserved for PROM, 254 MB used by NetBSD) > [ 1.0000000] avail memory = 239 MB > [ 1.0000000] mainbus0 (root) > [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21064-0 > [ 1.0000000] jensenio0 at mainbus0 > [ 1.0000000] pckbc0 at jensenio0 port 0x60 > [ 1.0000000] com0 at jensenio0 port 0x3f8: ns8250 or ns16450, no fifo > [ 1.0000000] com0: console > [ 1.0000000] com0: interrupting at vector 0x900 > [ 1.0000000] com1 at jensenio0 port 0x2f8: ns8250 or ns16450, no fifo > [ 1.0000000] com1: interrupting at vector 0x920 > [ 1.0000000] lpt0 at jensenio0 port 0x3bc > [ 1.0000000] lpt0: interrupting at eisa irq 1 > [ 1.0000000] mcclock0 at jensenio0 port 0x170: mc146818 compatible > time-of-day clock > [ 1.0000000] eisa0 at jensenio0 > [ 1.0000000] device CPQ3111 at eisa0 slot 1 not configured > [ 1.0000000] depca2 at eisa0 slot 2: DEC DE422 Ethernet > [ 1.0000000] depca2: shared memory at 0xd0000-0xdffff > [ 1.0000000] le0 at depca2 > [ 1.0000000] le0: failed to clear memory at 0 (0xff != 0xaa) > [ 1.0000000] ahb0 at eisa0 slot 6: Adaptec AHA-1742A SCSI > [ 1.0000000] ahb0: interrupting at eisa irq 12 > [ 1.0000000] scsibus0 at ahb0: 8 targets, 8 luns per target > [ 1.0000000] isa0 at jensenio0 > [ 1.0000000] vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff > [ 1.0000000] wsdisplay0 at vga0 (kbdmux ignored) > [ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 > > Has anybody seen this problem before that maybe knows a solution? Or > how to disable testing the isa floppy drive at all? > > btw the console shows it as under-sized! It is DKA200: > > >> sho dev > > BOOTDEV ADDR DEVTYPE RM/FX DEVNAM REV NUMBYTES > ------- ---- ------- ----- ------ --- -------- > ERA0 08-00-2B-BB-88-6B > DVA0 PC Floppy DISK RM > SCSI Devices.. > DKA0 A/0/0 DISK FX RZ28 D41C 2.10GB > DKA100 A/1/0 DISK FX RZ28 D41C 2.10GB > DKA200 A/2/0 DISK FX ST11827 6244 1.03GB > DKA400 A/4/0 RODISK RM RRD44 1094 ...... > MKA500 A/5/0 TAPE RM TLZ06 0491 ...... > HOST A/7/0 PROC AHA1742A G.2 > > >>> > > Thanks in advance, > > Nigel > > > > -- > Nigel Johnson, MSc., MIEEE, MCSE VE3ID/G4AJQ/VA3MCU > Amateur Radio, the origin of the open-source concept! > Skype: [email protected] > > >