Re: Useless and missing kernel variants in our builds
Izumi Tsutsui <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.arm |
|---|---|
| Message-ID | <[email protected]> |
I wrote:
> > What would be really usefull for this kernel would be a .ub variant.
> > For the real kernel we do exactly that - why not for the _INSTALL version?
>
> Maybe we need the same ${TOOL_MKUBOOTIAMGE} magics in
> src/distrib/distrib/evbarm/instkernel/instkernel/Makefile
> as mk.marvell does?
>
> > Can we find a simple way to drop the useless variants and add the missing
> > ones?
>
> We should have a simple script to invoke ${OBJCOPY} and
> ${TOOL_MKUBOOTIMAGE} ant share it between mk.marvell and
> instkernel/Makefile?
On a build host (sd1 is a 32GB SD):
---
% ftp https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/202407281510Z/evbarm-earmv5/installation/instkernel/netbsd-SHEEVAPLUG_INSTALL.img.gz
Trying [2a04:4e42:8c::262]:443 ...
Requesting https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/202407281510Z/evbarm-earmv5/installation/instkernel/netbsd-SHEEVAPLUG_INSTALL.img.gz
100% |***********************************| 4230 KiB 1.73 MiB/s 00:00 ETA
4331699 bytes retrieved in 00:02 (1.73 MiB/s)
% gunzip netbsd-SHEEVAPLUG_INSTALL.img.gz
% /s/netbsd-10/src/obj.evbarm/tooldir.NetBSD-10.0-i386/bin/nbmkubootimage -A arm -T kernel -a 0x00008000 -n "NetBSD/sheevaplug 10.99.11" netbsd-SHEEVAPLUG_INSTALL.img netbsd-SHEEVAPLUG_INSTALL.ub
image type: uimg
magic: 0x27051956
time: Mon Jul 29 03:03:19 2024
size: 11158096
load addr: 0x00008000
entry point: 0x00008000
data crc: 0xaea9acb1
os: 2 (netbsd)
arch: 2 (arm)
type: 2 (kernel)
comp: 0 (none)
name: NetBSD/sheevaplug 10.99.11
header crc: 0xdb0534ac
% su
# fdisk -u sd1
fdisk: primary partition table invalid, no magic in sector 0
fdisk: Cannot determine the number of heads
Disk: /dev/rsd1
NetBSD disklabel disk geometry:
cylinders: 30720, heads: 64, sectors/track: 32 (2048 sectors/cylinder)
total sectors: 62914560, bytes/sector: 512
BIOS disk geometry:
cylinders: 1024, heads: 255, sectors/track: 63 (16065 sectors/cylinder)
total sectors: 62914560
Partitions aligned to 16065 sector boundaries, offset 63
Do you want to change our idea of what BIOS thinks? [n]
Partition table:
0: <UNUSED>
1: <UNUSED>
2: <UNUSED>
3: <UNUSED>
Bootselector disabled.
No active partition.
Drive serial number: 0 (0x00000000)
Which partition do you want to change?: [none] 0
The data for partition 0 is:
<UNUSED>
sysid: [0..255 default: 169] 12
start: [0..3916cyl default: 63, 0cyl, 0MB] 2048
size: [0..3916cyl default: 62912512, 3916cyl, 30719MB] 260096
bootmenu: [] (space to clear)
Partition table:
0: Primary DOS with 32 bit FAT - LBA (sysid 12)
start 2048, size 260096 (127 MB, Cyls 0/32/33-16/81/1)
1: <UNUSED>
2: <UNUSED>
3: <UNUSED>
Bootselector disabled.
No active partition.
Drive serial number: 0 (0x00000000)
Which partition do you want to change?: [none]
We haven't written the MBR back to disk yet. This is your last chance.
Partition table:
0: Primary DOS with 32 bit FAT - LBA (sysid 12)
start 2048, size 260096 (127 MB, Cyls 0/32/33-16/81/1)
1: <UNUSED>
2: <UNUSED>
3: <UNUSED>
Bootselector disabled.
No active partition.
Drive serial number: 0 (0x00000000)
Should we write new partition table? [n] y
mirage# newfs_msdos /dev/rsd1e
/dev/rsd1e: 259808 sectors in 32476 FAT16 clusters (4096 bytes/cluster)
MBR type: 6
bps=512 spc=8 res=1 nft=2 rde=512 mid=0xf0 spf=127 spt=32 hds=64 hid=0 bsec=260096
# mount /dev/sd1e /mnt
# cp netbsd-SHEEVAPLUG_INSTALL.ub /mnt
# umount /mnt
#
---
On SHEEVAPLUG:
---
U-Boot 2011.12 (Mar 11 2012 - 18:59:46)
Marvell-Sheevaplug - eSATA - SD/MMC
SoC: Kirkwood 88F6281_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot: 0
Marvell>> mmc init
SDHC found. Card desciption is:
Manufacturer: 0x00, OEM "\x00\x00"
Product name: "\x00\x00\x00\x00\x00", revision 0.0
Serial number: 1356
Manufacturing date: 10/2018
CRC: 0x00, b0 = 0
mmc1 is available
Marvell>> fatload mmc 0:1 0x00800000 /netbsd-SHEEVAPLUG_INSTALL.ub
reading /netbsd-SHEEVAPLUG_INSTALL.ub
11158160 bytes read
Marvell>> bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: NetBSD/sheevaplug 10.99.11
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 11158096 Bytes = 10.6 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...
[ 1.0000000] NetBSD/evbarm (sheevaplug) booting ...
[ 1.0000000] [ Kernel symbol table missing! ]
[ 1.0000000] Loaded initial symtab at 0xc09b5cb0, strtab at 0xc09fe910, # entries 18611
[ 1.0000000] pmap_postinit: Allocated 35 static L1 descriptor tables
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.99.11 (SHEEVAPLUG_INSTALL) #0: Sun Jul 28 14:55:30 UTC 2024
[ 1.0000000] [email protected]:/usr/src/sys/arch/evbarm/compile/SHEEVAPLUG_INSTALL
[ 1.0000000] total memory = 512 MB
[ 1.0000000] avail memory = 490 MB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
[ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[ 1.0000000] cpu0: L1 16KB/32B 4-way (128 set) VIVT Instruction cache
[ 1.0000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIVT Data cache
[ 1.0000000] mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood
[ 1.0000000] mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz
[ 1.0000000] mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer
[ 1.0000000] mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface
[ 1.0000000] mvsocgpp0: 50 gpio pins
[ 1.0000000] mvsocgpp0: interrupts 96..103, intr 35
[ 1.0000000] mvsocgpp0: interrupts 104..111, intr 36
[ 1.0000000] mvsocgpp0: interrupts 112..119, intr 37
[ 1.0000000] mvsocgpp0: interrupts 120..127, intr 38
[ 1.0000000] mvsocgpp0: interrupts 128..135, intr 39
[ 1.0000000] mvsocgpp0: interrupts 136..143, intr 40
[ 1.0000000] mvsocgpp0: interrupts 144..151, intr 41
[ 1.0000000] mvsocgpp0: Data Out: 0x20000000
[ 1.0000000] mvsocgpp0: Data Out Enable Control: 0xffffffff
[ 1.0000000] mvsocgpp0: Data Blink Enable: 0x00000000
[ 1.0000000] mvsocgpp0: Data In Polarity: 0x00000000
[ 1.0000000] mvsocgpp0: Data In: 0x00000080
[ 1.0000000] mvsocgpp0: Interrupt Cause: 0x00000000
[ 1.0000000] mvsocgpp0: Interrupt Mask: 0x00000000
[ 1.0000000] mvsocgpp0: Interrupt Level Mask: 0x00000000
[ 1.0000000] mvsocgpp0: High Data Out: 0x00020000
[ 1.0000000] mvsocgpp0: High Data Out Enable Ctrl: 0xffffffff
[ 1.0000000] mvsocgpp0: High Blink Enable: 0x00000000
[ 1.0000000] mvsocgpp0: High Data In Polarity: 0x00000000
[ 1.0000000] mvsocgpp0: High Data In: 0x00014000
[ 1.0000000] mvsocgpp0: High Interrupt Cause: 0x00000000
[ 1.0000000] mvsocgpp0: High Interrupt Mask: 0x00000000
[ 1.0000000] mvsocgpp0: High Interrupt Level Mask: 0x00000000
[ 1.0000000] gpio0 at mvsocgpp0: 50 pins
[ 1.0000000] mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
[ 1.0000000] com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, 16-byte FIFO
[ 1.0000000] ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface
[ 1.0000000] usb0 at ehci0: USB revision 2.0
[ 1.0000000] gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine
[ 1.0000000] gtidmac0: XOR Engine 4 channels, intr 5, 6, 7, 8
[ 1.0000000] gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
[ 1.0000000] iic0 at gttwsi0: I2C bus
[ 1.0000000] mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator
[ 1.0000000] mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
[ 1.0000000] mvgbe0 at mvgbec0 port 0 irq 11
[ 1.0000000] mvgbe0: Ethernet address 02:50:43:a7:8e:bf
[ 1.0000000] makphy0 at mvgbe0 phy 0: Marvell 88E1318S Gigabit PHY, rev. 0
[ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
[ 1.0000000] mvgbe at mvgbec1 port 0 not configured
[ 1.0000000] mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface
[ 1.0000000] pci0 at mvpex0
[ 1.0000000] vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured
[ 1.0000000] mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC)
[ 1.0000000] mvsata0: GenIIe, 1hc, 2port/hc
[ 1.0000000] atabus0 at mvsata0 channel 0
[ 1.0000000] atabus1 at mvsata0 channel 1
[ 1.0000000] mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital Input/Output Interface
[ 1.0000000] sdmmc0 at mvsdio0
[ 1.0000030] WARNING: system needs entropy for security; see entropy(7)
[ 1.0299705] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.1399639] sdmmc0: SD card status: 4-bit, C10
[ 1.1399639] ld0 at sdmmc0: <0x00:0x0000::0x00:0x0000054c:0x04a>
[ 1.1399639] ld0: 30720 MB, 7801 cyl, 128 head, 63 sec, 512 bytes/sect x 62914560 sectors
[ 1.1599749] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 2.1299611] boot device: <unknown>
[ 2.1299611] root on md0a dumps on md0b
[ 2.1299611] mountroot: trying ffs...
[ 2.1299611] root file system type: ffs
[ 2.1299611] kern.module.path=/stand/evbarm/10.99.11/modules
[ 2.1516262] init: copying out flags `-s' 3
[ 2.1516262] init: copying out path `/sbin/init' 11
erase ^?, werase ^W, kill ^U, intr ^C
:
---
Izumi Tsutsui