Re: Radxa Orion O6

FUKAUMI Naoki <[email protected]>
Newsgroups gmane.os.netbsd.ports.arm
Message-ID <[email protected]>
On 1/30/25 21:15, FUKAUMI Naoki wrote:
> On 1/30/25 21:05, Jared McNeill wrote:
>> Can you open a PR for these two issues? (poor network performance and 
>> zero MAC address) It will be easier to track them separately, and 
>> there are likely experts on the networking side not following this 
>> mailing list that can help.
> 
> Of course I will. I need to remember how to send-pr though. ;)
> 
> By the way, the MAC address is zero because my board is a prototype. As 
> for performance, I just ordered a 5GbE NIC for my PC, so I'll check it 
> out with that.

https://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=59044

With rge(4) it reached 4.2Gbps.

# 4.7Gbps on Linux...

----
orion-o6# schedctl -A 0 iperf3 -c 169.254.31.236
Connecting to host 169.254.31.236, port 5201
[  5] local 169.254.180.163 port 65480 connected to 169.254.31.236 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   494 MBytes  4.12 Gbits/sec    0   8.00 MBytes 

[  5]   1.00-2.01   sec   505 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   2.01-3.01   sec   497 MBytes  4.17 Gbits/sec    0   8.00 MBytes 

[  5]   3.01-4.01   sec   500 MBytes  4.19 Gbits/sec    0   8.00 MBytes 

[  5]   4.01-5.01   sec   498 MBytes  4.18 Gbits/sec    0   8.00 MBytes 

[  5]   5.01-6.01   sec   501 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   6.01-7.01   sec   497 MBytes  4.17 Gbits/sec    0   8.00 MBytes 

[  5]   7.01-8.01   sec   500 MBytes  4.19 Gbits/sec    0   8.00 MBytes 

[  5]   8.01-9.01   sec   501 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   9.01-10.02  sec   498 MBytes  4.18 Gbits/sec    0   8.00 MBytes 

- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec  4.87 GBytes  4.18 Gbits/sec    0             sender
[  5]   0.00-10.02  sec  4.87 GBytes  4.18 Gbits/sec 
receiver

iperf Done.
----



For reference, below are the test results of rge(4) on NetBSD-current/amd64.

----
nbsd# iperf3 -c 169.254.175.117
Connecting to host 169.254.175.117, port 5201
[  5] local 169.254.211.112 port 65527 connected to 169.254.175.117 port 
5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.01   sec   515 MBytes  4.28 Gbits/sec    0   1.10 MBytes 

[  5]   1.01-2.02   sec   566 MBytes  4.70 Gbits/sec    0   1.66 MBytes 

[  5]   2.02-3.02   sec   561 MBytes  4.71 Gbits/sec    0   2.08 MBytes 

[  5]   3.02-4.02   sec   560 MBytes  4.69 Gbits/sec    0    863 KBytes 

[  5]   4.02-5.02   sec   560 MBytes  4.70 Gbits/sec    0   1.30 MBytes 

[  5]   5.02-6.02   sec   560 MBytes  4.70 Gbits/sec    0    933 KBytes 

[  5]   6.02-7.02   sec   560 MBytes  4.70 Gbits/sec    0   1.09 MBytes 

[  5]   7.02-8.02   sec   559 MBytes  4.69 Gbits/sec    0    672 KBytes 

[  5]   8.02-9.02   sec   560 MBytes  4.69 Gbits/sec    0   1.25 MBytes 

[  5]   9.02-10.02  sec   560 MBytes  4.69 Gbits/sec    0    573 KBytes 

- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec  5.43 GBytes  4.65 Gbits/sec    0             sender
[  5]   0.00-10.02  sec  5.43 GBytes  4.65 Gbits/sec 
receiver

iperf Done.
----

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.