RE: SCSI bus activity LED?

 
Yeah, I noticed that after I posted.  Here's one that works the other way around:
http://www.rancho.com/Products.aspx?ID=116
(Though who knows how much this thing costs.  Maybe best to revisit this topic in a few years.)
 
I'd prefer not to run an extra cable back into the Atari case, but I guess it's an option.
 
David Ross
[email protected]


----------------------------------------
> CC: [email protected]; [email protected]
> From: [email protected]
> To: [email protected]
> Subject: Re: SCSI bus activity LED?
> Date: Tue, 23 Mar 2010 05:44:48 +0100
>
>
> Am 22.03.2010 um 06:38 schrieb David Ross:
>
>> I'm interested in the possibility of connecting the TT030's SCSI bus
>> up to an iSCSI bridge. Something like:
>> http://www.attotech.com/products/product.php?cat=5&scat=8&sku=IPBR-1550-DR0&PHPSESSID=ac7da627feb322d7e3997e510f769371
>
> Are you sure this will work? It looks to me, this thing is to connect
> SCSI devices to an iSCSI initiator. I would think the bridge needs to
> be an initiator to connect to iSCSI storage.
>>
>> At the current time these bridges are quite expensive, but prices
>> will eventually fall.
>>
>> There are some advantages to this approach:
>> - No heat / noise issues with drives
>> - Disks can be swapped out virtually
>> - Transparent backups
>>
>> The one issue with an external iSCSI bridge would be that there
>> would be no drive light on the Atari itself. Maybe this is a minor
>> issue, but for me it's all about the authenticity. =) I did some
>> quick searching and I couldn't find a quick solution. Anyone know
>> of a SCSI device that provides bus activity LED pins?
>
> You could rip the LED out of the ATTO and connect the sockets to the
> TT-LED, if you can live with it being on when there is no activity.
> Or glue some reversing logic to that.
>
> Cheers
> Oskar