Re: Need help getting started

Hi Izumi, nice to read you!

Thanks a lot for your EtherNEC network driver.
I installed over ftp, it works like a charm!

NetBSD runs a lot better (performnce wise) than debian-68k at the 
moment. I do have some issues with pkgsrc / pgk_add i need to sort out,
and i can't get any X11 to run so far.

is it possible to have colored console?

here is my dmesg output:

--------------------------
NetBSD 6.1.2 (FALCON)
Atari Falcon (68060 rev.6 CPU/MMU/FPU)
total memory = 524 MB
avail memory = 515 MB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
clock0 at mainbus0: system hz 64 timer-A divisor 200/192
timecounter: Timecounter "clock" frequency 12288 Hz quality 100
grfbus0 at mainbus0
grfcc0 at grfbus0: width 640 height 400 monochrome
ite0 at grfcc0: 25x80 repeat at (30/100)s next at (10/100)s has keyboard
grfcc1 at grfbus0: width 640 height 400 monochrome
ite1 at grfcc1: 25x80 repeat at (30/100)s next at (10/100)s
grfcc2 at grfbus0: width 640 height 400 monochrome
ite2 at grfcc2: 25x80 repeat at (30/100)s next at (10/100)s
kbd0 at mainbus0
fdc0 at mainbus0
fd0 at fdc0: 1.44MB 80 cyl, 2 head, 18 sec
ser0 at mainbus0: modem1 on 68901 MFP1 USART
zs0 at mainbus0: serial2 on channel a and modem2 on channel b
ncrscsi0 at mainbus0
scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
nvr0 at mainbus0
lp0 at mainbus0
wdc0 at mainbus0
atabus0 at wdc0 channel 0
ne0 at mainbus0: EtherNEC on Atari ROM cartridge slot
ne0: NE2000 (RTL8019) Ethernet (8-bit)
ne0: Ethernet address 00:7a:09:03:34:25
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x50] auto
ne0: using 64 Hz polling
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0
wd0: <WDC WD800BEVE-00UYT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
4 views configured
1 mouse configured
root on wd0a dumps on wd0b
root file system type: ffs

------------------------------------------------------

Am 18.03.2014 15:42, schrieb Izumi Tsutsui:
> Stefan Niestegge wrote:
>
>> i downloaded the nano binary package from the AMIGA directory, since the
>> ATARI binary package directory was empty.
>>
>> Seems to work okay, i was able to modify some config files now.
>>
>> Then i used pkgsrc to make "links". i recognized that a binary
>> package was saved, too.
>> Should i upload these binary packages i compiled somewhere?
>
> Uploaded binaries (for amiga) can be used on all NetBSD/m68k ports,
> so it's rather worth to install and use various binaries you need.
>
> "Twitter client on m68k machines" is a major demonstration
> on Open Source Conference in Japan:
> http://mail-index.netbsd.org/port-x68k/2013/10/18/msg000038.html
>
> Tier II ports of NetBSD don't have so much news
> (there is no new hardware which should be supported)
> but it's worth to just continue to use them and report
> various results.
>
> - post your dmesg (which show what hardwareand devices are actually working)
>    to mailing list and dmesgd:
>    http://www.nycbug.org/?action=dmesgd&do=home
>
> - posting youtube video might also be interensting
>    http://www.youtube.com/watch?v=R_EdT8QWAkQ
>
> - try the latest -current kernel in daily build and
>    check if there is any breakage
>    http://releng.netbsd.org/cgi-bin/builds.cgi
>    http://www.netbsd.org/docs/current/index.html
>    (NetBSD provides good binary compatibility so old userland binaries
>     should still work with a newer kernel)
>
> - demonstrate your favorite machines in various events
>    http://movapic.com/pic/201104161105244da8f96468241
>
> etc.
>
> BTW, here is dmesg of my TT030 running NetBSD/atari 6.1.3:
> ---
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>      2006, 2007, 2008, 2009, 2010, 2011, 2012
>      The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>      The Regents of the University of California.  All rights reserved.
>
> NetBSD 6.1.3 (ATARITT030) #7: Tue Feb 18 22:55:46 JST 2014
>          tsutsui@mirage:/r/work/netbsd-6/src/sys/arch/atari/compile/ATARITT030
> Atari TT (m68030 CPU/MMU mc68882 FPU)
> total memory = 69632 KB
> avail memory = 65392 KB
> timecounter: Timecounters tick every 15.625 msec
> mainbus0 (root)
> clock0 at mainbus0: system hz 64 timer-A divisor 200/192
> timecounter: Timecounter "clock" frequency 12288 Hz quality 100
> grfbus0 at mainbus0
> grfcc0 at grfbus0: width 640 height 400 monochrome
> ite0 at grfcc0: 25x80 repeat at (30/100)s next at (10/100)s has keyboard
> grfcc1 at grfbus0: width 640 height 400 monochrome
> ite1 at grfcc1: 25x80 repeat at (30/100)s next at (10/100)s
> grfcc2 at grfbus0: width 640 height 400 monochrome
> ite2 at grfcc2: 25x80 repeat at (30/100)s next at (10/100)s
> kbd0 at mainbus0
> fdc0 at mainbus0
> fd0 at fdc0: 1.44MB 80 cyl, 2 head, 18 sec
> ser0 at mainbus0: modem1 on 68901 MFP1 USART
> zs0 at mainbus0: serial2 on channel a and modem2 on channel b
> ncrscsi0 at mainbus0
> scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
> nvr0 at mainbus0
> lp0 at mainbus0
> ne0 at mainbus0: EtherNEC on Atari ROM cartridge slot
> ne0: NE2000 (RTL8019) Ethernet (8-bit)
> ne0: Ethernet address 52:54:4c:09:fb:05
> ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
> ne0: using 64 Hz polling
> avmebus0 at mainbus0
> vme0 at avmebus0
> leprobe: cannot map memory-area
> we0 at vme0 port 0xfe200280-0xfe20029f iomem 0xfe0d0000-0xfe0d3fff irq 4
> we0: SMC8216 with SMC_TT VME-ISA bridge Ethernet (16-bit)
> we0: Ethernet address 00:00:c0:3f:87:ed
> timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
> scsibus0: waiting 2 seconds for devices to settle...
> probe(ncrscsi0:0:0:0): Does not support linked commands
> sd0 at scsibus0 target 0 lun 0: <Logitec, LHD-U32H/E, 200S> disk fixed
> sd0: 30533 MB, 30533 cyl, 16 head, 128 sec, 512 bytes/sect x 62533296 sectors
> 4 views configured
> 1 mouse configured
> root on sd0a dumps on sd0b
> root file system type: ffs
> ---
>
> Have fun,
>
> ---
> Izumi Tsutsui
>
>