[OT] RaQ2 and power

"Dave J. Barnes" <[email protected]> Tue, 08 Dec 2009 13:41:48 -0600

Newsgroups	gmane.os.netbsd.ports.cobalt
Message-ID	<[email protected]>

 >Setup: RAQ2, NetBSD 5.0, 256 mb of memory, 2.5" drive, no fan.
 >Observation: when the fan is connected, no problems occur whatsoever.

The 12 volt supply needs a minimum load. Normally, the 3.5 inch disk 
drive meets the requirement.
However, the 2.5 inch drive uses 5 V only. So, no load on 12 volt supply.

djb