Re: Any Qube 2700 users

It's good on mine.

On Sun, 8 Aug 2010, Izumi Tsutsui wrote:

>> Just wondering if there are any Qube 2700 users out there, and if the
>> recent restore CDs work on that one.
>
> 5.1_RC2 one just works.
>
> ---
> Cobalt Microserver Diagnostics - 'We serve it, you surf it'
> Built Fri Jun  5 10:42:59 PDT 1998
>
> 1.LCD Test................................PASS
> 2.Controller Test.........................PASS
> 4.Flash Test..............................PASS
> 5.Bank 0:.................................16M
> 6.Bank 1:.................................16M
> 7.Bank 2:.................................16M
> 8.Bank 3:.................................16M
> 9.Serial Test.............................PASS
> 10.PCI Expansion Slot....................**EMPTY**
> 12.IDE Test................................PASS
> 13.Ethernet Test...........................PASS
> 16.RTC Test................................PASS
>
>>> NetBSD/cobalt 5.1_RC2 Bootloader, Revision 0.9 [@0x80f00000]
>>> ([email protected], Fri May 21 01:30:51 UTC 2010)
>>> Model:		Cobalt Qube 2700
>>> Memory:		65536 k
>>> PROM boot string:	root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp
> Boot [nfs:netbsd]:
> Loading: nfs:netbsd
> 3795200+312180 [218160+211100]=0x453e4c
> Starting at 0x80001000
>
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>    2006, 2007, 2008, 2009, 2010
>    The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>    The Regents of the University of California.  All rights reserved.
>
> NetBSD 5.1_RC2 (GENERIC) #0: Fri May 21 01:41:38 UTC 2010
> 	[email protected]:/home/builds/ab/netbsd-5-1-RC2/cobalt/201005210534Z-obj/home/builds/ab/netbsd-5-1-RC2/src/sys/arch/cobalt/compile/GENERIC
> Cobalt Qube 2700
> total memory = 65536 KB
> avail memory = 59480 KB
> mainbus0 (root)
> cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU Rev. 1.0
> cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
> cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
> zsc0 at mainbus0 addr 0x1c800000 irq 4: optional Z85C30 serial port
> zstty0 at zsc0 channel 0 (console i/o)
> zstty1 at zsc0 channel 1
> mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
> panel0 at mainbus0 addr 0x1f000000
> gt0 at mainbus0 addr 0x14000000
> pci0 at gt0
> pchb0 at pci0 dev 0 function 0: Galileo GT-64011 System Controller, rev 1
> tlp0 at pci0 dev 7 function 0: DECchip 21041 Ethernet, pass 2.1
> tlp0: interrupting at level 2
> tlp0: Ethernet address 00:10:e0:00:09:46
> tlp0: 10baseT, 10baseT-FDX, 10base2, 10base5
> pcib0 at pci0 dev 9 function 0
> pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
> viaide0 at pci0 dev 9 function 1
> viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
> viaide0: primary channel interrupting at irq 14
> atabus0 at viaide0 channel 0
> viaide0: secondary channel interrupting at irq 15
> atabus1 at viaide0 channel 1
> VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at pci0 dev 9 function 2 not configured
> wd0 at atabus0 drive 0: <QUANTUM FIREBALLlct15 15>
> wd0: 14324 MB, 29104 cyl, 16 head, 63 sec, 512 bytes/sect x 29336832 sectors
> Kernelized RAIDframe activated
> boot device: tlp0
> root on tlp0
> nfs_boot: trying DHCP/BOOTP
> nfs_boot: DHCP next-server: 10.0.0.254
> nfs_boot: my_domain=netbsd.org
> nfs_boot: my_addr=10.0.0.160
> nfs_boot: my_mask=255.0.0.0
> nfs_boot: gateway=10.0.0.254
> root on 10.0.0.254:/nfsroot
> root file system type: nfs
> WARNING: clock gained 73 days
> WARNING: CHECK AND RESET THE DATE!
> warning: no /dev/console
> Created mfs /dev (839680 byte, 1568 inodes)
> Wed Aug  7 23:59:11 UTC 2010
> Starting file system checks:
> Create /dev/*
> Unpack /var/*
> Setting tty flags.
> Setting sysctl variables:
> kern.no_sa_support: 0 -> 1
> ddb.onpanic: 1 -> 0
> Starting network.
> /etc/rc: WARNING: $hostname not set.
> IPv6 mode: host
> Configuring network interfaces:.
> Adding interface aliases:.
> Mounting all filesystems...
> Checking quotas: done.
> Setting securelevel: kern.securelevel: 0 -> 1
> /etc/rc: WARNING: No swap space configured!
> Starting local daemons:.
> Updating motd.
> Starting paneld.
> Starting inetd.
> Thu Aug  8 00:00:05 UTC 2010
>
> NetBSD/cobalt (Amnesiac) (ttyZ0)
>
> login:
>
> ---
> Izumi Tsutsui
>

-- 
  --
  Al Boyanich
  adb -w -P "world> " -k /dev/meta/galaxy/ksyms /dev/god/brain