Re: au1550 support IDE harddisk or not?

Water NB wrote:
> source code was updated on April 22.
>
> ################ config file: m1550nfs ##########
> include         "arch/evbmips/conf/DBAU1550"
>
> no makeoptions DEFTEXTADDR
> makeoptions DEFTEXTADDR="0x80100000"
> options         INET6
>
> file-system     KERNFS          # kernel data-structure filesystem
> file-system     PROCFS          # /proc
> options         INSECURE        # disable kernel security levels
> pseudo-device   ksyms
>   
> ################ output ##########
>
>
> YAMON ROM Monitor, Revision 02.23DB1550.
> Copyright (c) 1999-2000 MIPS Technologies, Inc. - All Rights Reserved.
>
> For a list of available commands, type 'help'.
>
> Compilation time =            Apr  4 2006  18:05:32
> MAC address =                 00.00.1a.19.0c.26
> Processor Company ID =        0x03
> Processor ID/revision =       0x02 / 0x00
> Endianness =                  Little
> CPU =                         396 MHz
> Flash memory size =           128 MByte
> SDRAM size =                  192 MByte
> First free SDRAM address =    0x8008cef4
>
> Environment variable 'start' exists. After 2 seconds
> it will be interpreted as a YAMON command and executed.
> Press Ctrl-C to bypass this.
>
> About to load tftp://192.168.32.1/netbsd.srec
> Press Ctrl-C to break
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> ........................................
> .............................
> Start = 0x80100000, range = (0x80100000,0x80459bcf), format = SREC
> MIPS32/64 params: cpu arch: 32
> MIPS32/64 params: TLB entries: 32
> MIPS32/64 params: Icache: line = 32, total = 16384, ways = 4
>                  sets = 128
> MIPS32/64 params: Dcache: line = 32, total = 16384, ways = 4
>                  sets = 128
>   picache_stride    = 4096
>   picache_loopcount = 4
>   pdcache_stride    = 4096
>   pdcache_loopcount = 4
>   Dcache is coherent
>   Icache is coherent against Dcache
> DBAu1550 (cabernet), CPLDv1, no daughtercard
> Memory size: 0x0c000000
> [ Kernel symbol table missing! ]
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 3.99.18 (m1550nfs) #4: Sat Apr 22 15:24:20 CST 2006
>         root@PC-026:/opt/netbsd/world/mipsel_obj/sys/arch/evbmips/compile/m1550n
> fs
> AMD Alchemy DBAu1550
> total memory = 192 MB
> avail memory = 182 MB
> mainbus0 (root)
> cpu0 at mainbus0: 396.00MHz (hz cycles = 773438, delay divisor = 396)
> cpu0: Alchemy Au1550 (Rev 2 core) (0x3030200) Rev. 0 with software emulated floa
> ting point
> cpu0: 16KB/32B 4-way set-associative L1 Instruction cache, 32 TLB entries
> cpu0: 16KB/32B 4-way set-associative write-back L1 Data cache
> obio0 at mainbus0
> aubus0 at mainbus0
> aucom0 at aubus0 addr 0x11100000 irq 0: Au1X00 UART, working fifo
> aucom0: console
> aucom1 at aubus0 addr 0x11200000 irq 8: Au1X00 UART, working fifo
> aucom2 at aubus0 addr 0x11400000 irq 9: Au1X00 UART, working fifo
> aurtc0 at aubus0: Au1X00 programmable clock
> aumac0 at aubus0 addr 0x10500000 irq 27: Au1X00 10/100 Ethernet
> aumac0: Ethernet address 00:00:1a:19:0c:26
> acphy0 at aumac0 phy 31: AC101 10/100 media interface, rev. 11
> acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> aumac1 at aubus0 addr 0x10510000 irq 28: Au1X00 10/100 Ethernet
> aumac1: Ethernet address 00:00:1a:19:1c:26
> acphy1 at aumac1 phy 31: AC101 10/100 media interface, rev. 11
> acphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ohci0 at aubus0 addr 0x14020000 irq 26: Alchemy OHCI
> ohci0: OHCI version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> aupci0 at aubus0 addr 0x14005000: Alchemy Host-PCI Bridge, 66MHz
> pci0 at aupci0 bus 0
> pci0: i/o space, memory space enabled
> augpio0 at aubus0 addr 0x11900100: Alchemy GPIO, primary block
> gpio0 at augpio0: 27 pins
> augpio1 at aubus0 addr 0x11700000: Alchemy GPIO, secondary block
> gpio1 at augpio1: 16 pins
> aupcmcia0 at aubus0: Alchemy PCMCIA, 2 slots
> pcmcia0 at aupcmcia0 socket 0 irq 35, bottom slot
> pcmcia1 at aupcmcia0 socket 1 irq 37, top slot
> aupsc at aubus0 addr 0x11a00000 irq 10 not configured
> aupsc at aubus0 addr 0x11b00000 irq 11 not configured
> aupsc at aubus0 addr 0x10a00000 irq 12 not configured
> aupsc at aubus0 addr 0x10b00000 irq 13 not configured
> root device: aumac0
> dump device:
> file system (default generic):
> root on aumac0
> mountroot: trying ffs...
> mountroot: trying nfs...
> nfs_boot: trying DHCP/BOOTP
> aumac0: link state changed to UP
> nfs_boot: DHCP next-server: 192.168.32.1
> nfs_boot: my_addr=192.168.32.33
> nfs_boot: my_mask=255.255.255.0
> nfs_boot: gateway=192.168.32.1
> root on 192.168.32.1:/opt/netbsd/au1550root
> root time: 0x444b0b66
> root file system type: nfs
> WARNING: clock lost 13255 days -- CHECK AND RESET THE DATE!
> init path (default /sbin/init):
> init: copying out path `/sbin/init' 11
> Tue Jan  6 21:34:12 CST 1970
> Checking for botched superblock upgrades: done.
> Starting file system checks:
> mount: /: unknown special file or file system.
> Setting tty flags.
> Setting sysctl variables:
> Starting network.
> Hostname: au1550
> IPv6 mode: host
> Configuring network interfaces:.
> add net default: gateway 192.168.32.1
> Adding interface aliases:
> Building databases...
> 192.168.32.1:/opt/netbsd/au1550root: inaccurate wcc data (ctime) detected, disab
> ling wcc
> Starting syslogd.
> Checking for core dump...
> savecore: no core dump (no dumpdev)
> Mounting all filesystems...
> Clearing /tmp.
> Checking quotas: done.
> Starting virecover.
> Jan  6 21:34:20 au1550 /netbsd: aumac0: link state changed to UP
> Starting local daemons:.
> Updating motd.
> Starting sshd.
> Starting sendmail.
> Starting inetd.
> Starting cron.
> Tue Jan  6 21:34:24 CST 1970
>
> NetBSD/evbmips (au1550) (console)
>
> login: root
> Jan  6 21:34:32 au1550 login: ROOT LOGIN (root) ON console
> Last login: Mon Jan  5 21:15:41 1970 on console
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 3.99.18 (m1550nfs) #4: Sat Apr 22 15:24:20 CST 2006
>
> Welcome to NetBSD!
>
> You have mail.
> Terminal type is vt100.
> We recommend creating a non-root account and using su(1) for root access.
> au1550#
>   

Hmm... that's kind of a stumper.  Something must be wrong.  It shows up
on my board:

aupci0 at aubus0 addr 0x14005000: Alchemy Host-PCI Bridge, 66MHz
pci0 at aupci0 bus 0
pci0: i/o space, memory space enabled
hptide0 at pci0 dev 11 function 0: PCI configuration registers:
  Common header:
    0x00: 0x00071103 0x02300147 0x01040002 0x00008800

Can you add PCI_CONFIG_DUMP to your  options?

-- 
Garrett D'Amore, Principal Software Engineer
Tadpole Computer / Computing Technologies Division,
General Dynamics C4 Systems
http://www.tadpolecomputer.com/
Phone: 951 325-2134  Fax: 951 325-2191