Re: 425t serial console

On Dec 25, 2007, at 8:05 PM, KIYOHARA Takashi wrote:
> I having apollo Series 400 (425t).  I want to work NetBSD with this  
> machine.
> Because I don't have the cable of RGB, it does by being using the  
> serial
> console.  However, nothing was displayed though the serial cable was
> connected.
>
>  9600 bps, 8 bits, no parity, 1 stop bit.
>
>
> Should I obtain RGB cable and the HIL keyboard first?
> Please help someone.

Boy... This is really reaching into the deep dark recesses... There  
was a config menu in the bootrom (in HP mode, apollo mode was  
different) where you set the console device... If it's in RGB/HIL  
mode, then you'll get nothing on the serial port...

Unfortunately, I can't remember the exact keystrokes... I think you  
had to interrupt the bootrom with <esc> or something to get the config  
menu... If the machine is in apollo mode, you will need to switch it  
to HP mode in order to boot NetBSD.