Re: Installation of 20020415-current snapshot

So, to get around this problem, could I set up the 
machine to use the serial port as the console?

-Sageev

----- Original Message ----- 
From: "Gregory McGarry" <[email protected]>
To: "Sageev George" <[email protected]>
Cc: <[email protected]>
Sent: Friday, May 03, 2002 11:37 PM
Subject: Re: Installation of 20020415-current snapshot


> > >> NetBSD/hp300 Primary Boot, Revision 1.13
> > >> (gregm@mcgarry, Mon Apr 15 08:46:32 NZST 2002)
> > >> HP 9000/425t SPU
> > >> Enter "reset" to reset system.
> > Boot: [[[le0a:]netbsd][-a][-c][-d][-s][-v][-q]] :- sd3b:netbsd
> > 692350+24936+164544 [75424+51665]=0xf86e0
> > Start @ 0xfe803400 [1=0xfe8db4a8-0xf86e0]...
> > Entry point: 0xfe803400
> > 
> > I don't know what to do with this.  I'm going to
> > try the 20020312-1.5.3_RC1 snapshot next.
> 
> I can't see anything obviously wrong.  Perhaps dca0 has been
> picked up as the console, in which case DCAREMID0/DCAREMID1
> don't mean what they infer.
> 
> > WARNING: bad date in battery clock
> 
> And another 4xx machine with a busted clock.
> 
> Do all the 400-series machines have external frame buffers?
> 
> -- Gregory McGarry <[email protected]>
>