Re: HP 9000/332 support?

I=E2=80=99ve booted my HP 9000-332 to single-user, here=E2=80=99s my =
dmesg! It still thinks the HP 98543A framebuffer is 1024x400x4 rather =
than 512x400x4 so the text is a bit off, but I can make it sufficiently =
legible to use.

It seems like if I could build a stripped down kernel, and possibly use =
local HP-IB storage for swap, it would work fine. And I bet if I put an =
HP 98550A in it the display would be perfect, just as it is on my HP =
9000-433s and 425t.

  -- Chris

[     1.000000] bootinfo found at 0xff802000
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, =
2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, =
2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All =
rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All =
rights reserved.
[     1.000000] NetBSD 9.0 (GENERIC) #1: Sat Apr  4 16:56:22 PDT 2020
[     1.000000]         =
[email protected]:/usr/obj/sys/arch/hp300/compile/GENERIC
[     1.000000] HP 9000/340 (16.67MHz MC68030 CPU+MMU, 16.67MHz MC68882 =
FPU<2147483552>)
[     1.000000] total memory =3D 8176 KB
[     1.000000] avail memory =3D 3664 KB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] mainbus0 (root)
[     1.000000] intio0 at mainbus0
[     1.000000] rtc0 at intio0 addr 0x420000
[     1.000000] hil0 at intio0 addr 0x428000 ipl 1
[     1.000000] nhpib1 at intio0 addr 0x478000 ipl 3: internal HP-IB
[     1.000000] hpibbus1 at nhpib1
[     1.000000] dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, =
32-bit DMA
[     1.000000] topcat0 at intio0 addr 0x560000: 1024x400x4 HP98543 =
topcat frame buffer
[     1.000000] wsdisplay0 at topcat0 kbdmux 1: console (std, vt100 =
emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] dio0 at mainbus0
[     1.000000] com0 at dio0 scode 9 ipl 5: ns8250 or ns16450, no fifo
[     1.000000] 98622A at dio0 scode 12 ipl 3 not configured
[     1.000000] le0 at dio0 scode 21 ipl 5: address 08:00:09:02:39:57
[     1.000000] le0: 8 receive buffers, 2 transmit buffers
[     1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 =
Hz quality 0
[     1.000009] timecounter: Timecounter "mc6840" frequency 250000 Hz =
quality 100
[     2.104865] hilkbd0 at hil0 code 1: 109-key keyboard, layout 1f
[     2.154833] wskbd0 at hilkbd0 mux 1
[     2.189885] wskbd0: connecting to wsdisplay0
[     6.573065] boot device: le0
[     6.593061] root on le0
[     6.633605] nfs_boot: trying DHCP/BOOTP
[     9.691805] nfs_boot: BOOTP next-server: 10.0.1.130
[     9.704173] nfs_boot: my_name=3Dhp9k332
[     9.718801] nfs_boot: my_addr=3D10.0.1.77
[     9.724505] nfs_boot: my_mask=3D255.0.0.0
[     9.740185] nfs_boot: gateway=3D10.0.1.1
[    15.919333] root on =
pi3bsd.eschatologist.net:/export/NetBSD/9.0/root/hp9k332
[    15.932213] root file system type: nfs
[    15.947829] kern.module.path=3D/stand/hp300/9.0/modules
[    15.989281] WARNING: preposterous TOD clock time
[    16.000921] WARNING: using filesystem time
[    16.019341] WARNING: CHECK AND RESET THE DATE!