Re: HP 9000-382 based instrument panics on cnopen()

Booting with the console switched to remote (serial) allowed me to boot =
further. I=E2=80=99ve attached a dmesg.

It looks like it=E2=80=99s not finding/finishing or finishing the =
console initialization, like you suggested =E2=80=94 there=E2=80=99s =
nothing like a topcat0 found. Time to add some logging!

Oh yeah, also, NetBSD=E2=80=99s not so happy booting the GENERIC kernel =
with only 8MB of RAM, and the SIMMs that I got to bring this to 32MB =
don=E2=80=99t seem to work. It=E2=80=99s supposed to use the same SIMMs =
as the 9000-425e, is there anything anyone can tell me about the =
requirements?

  =E2=80=94 Chris

[   1.0000000] bootinfo found at 0xff802000
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, =
2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, =
2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All =
rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All =
rights reserved.

[   1.0000000] NetBSD 9.2_STABLE (GENERIC) #47: Wed Sep  8 13:35:31 PDT =
2021
[   1.0000000] 	=
[email protected]:/usr/obj/hp300/sys/arch/hp300/compile/GENERIC
[   1.0000000] HP 9000/382 (25MHz MC68040 CPU+MMU+FPU, 4k on-chip =
physical I/D caches)
[   1.0000000] total memory =3D 8176 KB
[   1.0000000] avail memory =3D 3648 KB
[   1.0000000] mainbus0 (root)
[   1.0000000] intio0 at mainbus0
[   1.0000000] rtc0 at intio0 addr 0x420000
[   1.0000000] frodo0 at intio0 addr 0x41c000 ipl 5
[   1.0000000] dnkbd at frodo0 offset 0x0 not configured
[   1.0000000] com1 at frodo0 offset 0x40: ns8250 or ns16450, no fifo
[   1.0000000] com2 at frodo0 offset 0x60: ns8250 or ns16450, no fifo
[   1.0000000] hil0 at intio0 addr 0x428000 ipl 1
[   1.0000000] nhpib1 at intio0 addr 0x478000 ipl 3: internal HP-IB
[   1.0000000] hpibbus1 at nhpib1
[   1.0000000] dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, =
32-bit DMA
[   1.0000000] dio0 at mainbus0
[   1.0000000] com0 at dio0 scode 9 ipl 5: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] internal parallel at dio0 scode 12 ipl 3 not configured
[   1.0000000] spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, =
SCSI ID 7
[   1.0000000] scsibus0 at spc0: 8 targets, 8 luns per target
[   1.0000000] 98622A at dio0 scode 16 ipl 4 not configured
[   1.0000000] 98622A at dio0 scode 17 ipl 6 not configured
[   1.0000000] le0 at dio0 scode 21 ipl 5: address 52:50:4b:02:d6:d4
[   1.0000000] le0: 8 receive buffers, 2 transmit buffers
[   1.0093700] scsibus0: waiting 2 seconds for devices to settle...
[   2.0587780] hilkbd0 at hil0 code 1: 109-key keyboard, layout 1f
[   2.1050660] wskbd0 at hilkbd0 mux 1
[   3.1383100] sd0 at scsibus0 target 3 lun 0: <TEAC, FC-1     HF   00, =
RV P> disk removable
[   3.1783060] sd0(spc0:0:3:0): not ready, data =3D 00 00 00 00 04 00 00 =
00
[   3.2310820] sd0: drive offline
[   3.2595460] sd0: async, 8-bit transfers
[   3.3682220] sd1 at scsibus0 target 6 lun 0: <FUJITSU, M1603S-512, =
6404> disk fixed
[   3.3982260] sd1: 519 MB, 3457 cyl, 3 head, 102 sec, 512 bytes/sect x =
1064268 sectors
[   3.4183620] sd1: async, 8-bit transfers
[   3.9779900] sd0(spc0:0:3:0): illegal request, data =3D 00 00 00 00 20 =
00 00 00
[   4.0979300] boot device: le0
[   4.1149980] root on le0
[   4.1249340] nfs_boot: trying DHCP/BOOTP
[   7.1467300] nfs_boot: BOOTP next-server: 10.0.1.47
[   7.1588140] nfs_boot: my_name=3Dportabulous
[   7.1766980] nfs_boot: my_addr=3D10.0.1.81
[   7.1924020] nfs_boot: my_mask=3D255.0.0.0
[   7.1981380] nfs_boot: gateway=3D10.0.1.1
[  13.2642860] root on =
core.eschatologist.net:/export/NetBSD/9.0/root/portabulous
[  13.2792460] root file system type: nfs
[  13.2939580] kern.module.path=3D/stand/hp300/9.2/modules
[  13.3242380] WARNING: preposterous TOD clock time
[  13.3372460] WARNING: using filesystem time
[  13.3461980] WARNING: CHECK AND RESET THE DATE!
[  64.1339340] UVM: pid 5 (sysctl), uid 0 killed: out of swap
[1]   Killed                  /sbin/sysctl -n kern.boothowto 2>/dev/null
/etc/rc.conf is not configured.  Multiuser boot aborted.
Enter pathname of shell or RETURN for /bin/sh:=