Re: Difficulty with netbooting - le0: lost carrier when bringing down thenetbsd kernel
Mouse <[email protected]> Wed, 24 Dec 2025 09:41:43 -0500 (EST)
| Newsgroups | gmane.os.netbsd.ports.hp300 |
|---|---|
| Message-ID | <[email protected]> |
> But I've long lost my boot drives of yesteryear, and I can't find anything S$ Where are you geographically? It's a long shot, but, if you're near me, well, I still have numerous SCSI disks and wouldn't mind donating a couple to the cause. (I tried checking www.hell.org in case it said something useful, but all I got was a redirect to HTTPS, which I would have to find a work machine to use.) > I see that you say that the kernel is delivered via nfs. Does that mean the$ It depends. Depending on the hardware - or more precisely the firmware - there may or may not be. Suns, to cite an example I know better, use reverse ARP to get an address and then TFTP a file named based on that address; that file's code controls what further happens. Assuming the text > The bootstrap sequense is: > - the firmware uses rbootd protocol to load a bootloader from a server > - the bootloader uses BOOTP/DHCP to get IP addresses of server and client > - the bootloader also tries to mount servers directory using NFS > - the bootloader loads the specified kernel from the NFS server is accurate (I don't know - if I ever netbooted an hp300, it was long enough ago I don't recall details, and even if I did they would have been for decades-ago NetBSD), then, once rbootd finishes, whatever else happens is up to the bootloader. One thing I've found very useful when diagnosing netboot issues is to just snoop the network for packets to/from the subject host's MAC address. When it gets stuck, typically, the last few packets will point you towards what you need to fix or setup next. /~\ The ASCII Mouse \ / Ribbon Campaign X Against HTML [email protected] / \ Email! 7D C8 61 52 5D E7 2D 39 4E F1 31 3E E8 B3 27 4B