Re: problems booting HP 9000/715

Good evening (morning for you).  I would say, at least for the time being,
run the machine w/ as little RAM as possible.  There was an earlier post
about panics trying to 'map i/o space' and running w/ 32 v.s. 96 meg
helped.  I an into the same problem and yoinking some simms helped.

Also, did your 715, when you ran 'boot lan', do bootp or rarp/bootparamd?
-lava

On Sun, 9 Jun 2002 @ 9:23am (+0400), Gleb Smirnoff wrote:

GS>  Hi!
GS>
GS> Have got an HP 9000/715 workstation, and trying to boot NetBSD
GS> on it. But kernel (taken from ftp.netbsd.org) crashes.
GS> What can I do?
GS>
GS> Firmware Version  1.2
GS> Duplex Console IO Dependent Code (IODC) revision 0
GS> ------------------------------------------------------------------------------
GS>    (c) Copyright 1990-1996, Hewlett-Packard Company, All rights reserved
GS> ------------------------------------------------------------------------------
GS>   Processor   Speed            State           CoProcessor State  Cache Size
GS>   ---------  --------   ---------------------  -----------------  ----------
GS>       0      120  Mhz   Active                 Functional          256 KB
GS>   Central Bus Speed (in mhz)  :        120
GS>   Available Memory (bytes)    :  301989888
GS>   Good Memory Required (bytes):   23252992
GS>    Primary boot path:    core.LAN.0.0.0.0.0.0
GS>    Alternate boot path:  core.SCSI.6.0
GS>    Console path:         core.SERIAL_1.9600.8.none
GS>    Keyboard path:        core.PS2
GS> CPU 0
GS>   WARNING:  Memory has been initialized, but not tested as a result of
GS>             FASTBOOT being enabled.  To test memory, disable FASTBOOT
GS>             and reboot system
GS> Processor is booting from first available device.
GS> To discontinue, press any key within 10 seconds.
GS> Boot terminated.
GS> ------- Main Menu -------------------------------------------------------------
GS>         Command                         Description
GS>         -------                         -----------
GS>         BOot [PRI|ALT|<path>]           Boot from specified path
GS>         PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
GS>         SEArch [DIsplay|IPL] [<path>]   Search for boot devices
GS>         COnfiguration menu              Displays or sets boot values
GS>         INformation menu                Displays hardware information
GS>         SERvice menu                    Displays service commands
GS>         DIsplay                         Redisplay the current menu
GS>         HElp [<menu>|<command>]         Display help for menu or command
GS>         RESET                           Restart the system
GS> -------
GS> Main Menu: Enter command or menu > BO LAN
GS> Interact with IPL (Y or N)?> y
GS> Booting...
GS> Network Station Address 080009-f70300
GS> Boot IO Dependent Code (IODC) revision 0
GS> HARD Booted.
GS> >> NetBSD/hp700 LIF Boot, Revision 1.1
GS> >> ([email protected], Tue Jun  4 13:28:53 EDT 2002)
GS> >> Enter "reset" to reset system.
GS> Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
GS> 2149424+81920+188416 [283456+68920]=0x31959c
GS> Start @ 0x80000 [1=0x342000-0x39959c]...
GS> SPID bits: 0x0, error = -2
GS> [ using 357788 bytes of netbsd ELF symbol table ]
GS> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
GS>     The NetBSD Foundation, Inc.  All rights reserved.
GS> Copyright (c) 1982, 1986, 1989, 1991, 1993
GS>     The Regents of the University of California.  All rights reserved.
GS> NetBSD 1.6A (GENERIC) #0: Tue Jun  4 15:12:20 EDT 2002
GS>     [email protected]:/data/union-hp700-b/src/sys/arch/hp700/c
GS> ompile/GENERIC
GS> HP9000/type 80, sv 58e PA-RISC 1.1
GS> real mem = 288 MB (512 KB reserved for PROM, 239 MB used by NetBSD)
GS> avail mem = 223 MB
GS> using 3712 buffers containing 14848 KB of memory
GS> mainbus0 (root) [flex fff80000]
GS> pdc0 at mainbus0
GS> "FW SCSI" at mainbus0 (type 4, sv 89) hpa f3f8c000 not configured
GS> mem0 at mainbus0 hpa fffb1000: size 288MB
GS> cpu0 at mainbus0 hpa fffa0000 irq 31: Tornado rev 0, lev 1, cat A, 120 MHz clk
GS> cpu0: shadows, 258K/256K D/I caches, 120 shared TLB, 16 shared BTLB
GS> cpu0: Tornado floating point, rev 1
GS> "WAX Bus Adapter" at mainbus0 (type b, sv 8e) hpa ffe00000 not configured
GS> "WAX EISA Bus Adapter" at mainbus0 (type b, sv 90) hpa fc000000 not configured
GS> lasi0 at mainbus0 hpa ffd00000 irq 28: rev 3.0
GS> gsc0 at lasi0
GS> "PS/2 port" at gsc0 (type a, sv 84) hpa ffd08100 not configured
GS> "PS/2 port" at gsc0 (type a, sv 84) hpa ffd08000 not configured
GS> "floppy controller" at gsc0 (type a, sv 83) hpa ffd0a000 not configuredlpt0 at gsc0 hpa ffd02000 irq 7
GS> com0 at gsc0 hpa ffd05000 irq 5: ns16550a, working fifo
GS> ie0 at gsc0 hpa ffd07000 irq 8: v3.0 address 08:00:09:f7:03:00, type LASI/i82596
GS> CA
GS> osiop0 at gsc0 hpa ffd06000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
GS> scsibus0 at osiop0: 8 targets, 8 luns per target
GS> WARNING: BTLB address misaligned
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS> kernel: DTLB miss trap, code=f0069000
GS>
GS>
GS> --
GS> Totus tuus, Glebius.
GS> GLEBIUS-RIPN GLEB-RIPE
GS>

later -           | _BonaFide[] = { coder, author, | /~\ The ASCII Ribbon
Brian A. Seklecki | problem solver, scholar, BOFH, | \ / Campaign Against
                  | vegetarian, runner, NetBSD     |  X  Exchange, Outlook
                  | advocate, spiritual machine }; | / \ & HTML Email

"There are only two things infinite:  The universe, and human stupidity.  And I'm not to sure about the first one."  -Albert Einstein