D320 success and questions

Hi all,

First I would like to say that I have a good, working D320 booted from 
NFS.  Thanks to all the people working on the hp700 port!  There is a 
dmesg attached to the end of this email.

My questions are as follows:

1. the GENERIC kernel config has a commented entry for "siop* at gsc?" 
but this driver doesn't work at all.  It looks like it's using an 
outdated SCSI interface (I couldn't find ncr53c7xx_ functions or 
variables anywhere) and unfortuntately I don't know enough to bring it 
up to date myself.  Is there a possibility of getting this fixed?

2. I have a J3515 10/100 ethernet card that doesn't appear to be 
supported at all.  The chip is a DEC 21140-AE.  Is there any chance of a 
driver for this card?  It would make the system a LOT more usable to me!

Thanks again for everyone's hard work.  It's appreciated!

-Henry Bent
[email protected]

--
NetBSD 2.99.16 (GENERIC) #1: Mon Feb 21 14:57:42 EST 2005
         root@hbent2:/usr/obj/src-current/sys/arch/hp700/compile/GENERIC
HP9000/803/D220/D320 (UltraLight L2 132)
real mem = 320 MB (73728 reserved for PROM, 294 MB used by NetBSD)
avail mem = 288 MB
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
cpu0 at mainbus0 hpa 0xfffbe000 path 62 irq 31 ipl 0: PA7300LC 
(Velociraptor) rev 12
cpu0: PCX-L2, PA-RISC 1.1e, lev 1, cat A, 132 MHz clk
cpu0: shadows, 64K/64K D/I caches, 96 shared TLB, 8 shared BTLB
cpu0: VR floating point, rev 1
mem0 at mainbus0 hpa 0xfffbf000 path 63: size 320MB
phantomas0 at mainbus0 hpa 0xffc00000 path 8
"Bus Converter Port" at phantomas0 (type 0x7, sv 0xc) hpa 0xfff80000 
path 8/0 not configured
"FW SCSI" at phantomas0 (type 0x4, sv 0x89) hpa 0xfff84000 path 8/4 not 
configured
"HP HSC-PCI Cards" at phantomas0 (type 0x4, sv 0x9d) hpa 0xfff88000 path 
8/8 not configured
lasi0 at phantomas0 hpa 0xffc00000 path 8/16 irq 28: rev 3.0
gsc0 at lasi0
lpt0 at gsc0 hpa 0xffd02000 path 8/16/0 irq 7 ipl 1
osiop0 at gsc0 hpa 0xffd06000 path 8/16/5 irq 9 ipl 2: NCR53C710 rev 2, 
40MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets, 8 luns per target
iee0 at gsc0 hpa 0xffd07000 path 8/16/6 irq 8 ipl 3: Intel 82596CA 
address xx:xx:xx:xx:xx:xx
gsckbc0 at gsc0 hpa 0xffd08000 path 8/16/7 irq 26 ipl 4: keyboard
gsckbc1 at gsc0 hpa 0xffd08100 path 8/16/8: mouse
wax0 at phantomas0 hpa 0xffe00000 path 8/20 irq 27
gsc1 at wax0
com0 at gsc1 hpa 0xffe02000 path 8/20/2 irq 6 ipl 5: ns16550a, working fifo
"WAX EISA Bus Adapter" at gsc1 (type 0xb, sv 0x90) hpa 0xfc000000 path 
8/20/5 not configured
biomask 000000c4 netmask 000000cc ttymask 000001fe
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...