Re: netbooting a PA-RISC 712/80

JK> bootpd: info(6):   recvd pkt from IP addr 0.0.0.0
JK> bootpd: info(6):   bootptab mtime: Wed Jul 10 10:48:33 2002
JK> bootpd: info(6):   request from Ethernet address XX:XX:XX:XX:XX:XX
JK> bootpd: info(6):   found 192.168.1.110 (tapeserv)

....on the box you're netbooting from, kill of inetd and restart it with
'inetd -dl' to debug your TFTP connections.  You should see incoming
tftp's from the .110 machine for SYSNBSD (available from the snapshot
dir).

-lava

JK> bootpd: info(6):   bootfile="/tftpboot/SYSNBSD"
JK> bootpd: info(6):   vendor magic field is 99.130.83.99
JK> bootpd: info(6):   sending reply (with RFC1048 options)
JK> bootpd: info(6):   setarp 192.168.1.110 - XX:XX:XX:XX:XX:XX
JK> bootpd: info(6):   arp -d 192.168.1.110; arp -s 192.168.1.110 XX:XX:XX:XX:XX:XX temp
JK>
JK>
JK>
JK>
JK> After this, it simply waits, and the HP box drops right back into bootloader.
JK> I have a sneaking suspicion that possibly there is an issue with tftp
JK> serving up the kernel - is this a likely possibility?
JK>
JK>
JK> To sum it up:
JK> 1) Which kernel do I serve to perform an over the net install, ie which has all the utilities for an install?
JK> 2) Will this system work fine with NetBSD?  (its not listed explicitly, but the
JK> hardware seems to match closely)
JK> 3) What should happen next, and what could be causing this problem?
JK>
JK>
JK>
JK> Cheers!
JK>
JK>
JK> Jiro
JK> "If it's got Gates, or got Windows, its not Open."
JK>

later -           | _BonaFide[] = { coder, author, | /~\ The ASCII Ribbon
Brian A. Seklecki | problem solver, scholar, BOFH, | \ / Campaign Against
                  | vegetarian, runner, NetBSD     |  X  Exchange, Outlook
                  | advocate, spiritual machine }; | / \ & HTML Email

PGP: 0111 4618 0111 4618 4AB2 24EB C853 6611 75C4 A91E A7A7 4973

"There are only two things infinite:  The universe, and human stupidity.  And I'm not to sure about the first one."  -Albert Einstein