Re: Messages from NetBSD/hp700 of 201401091000Z

Hi,

From: Nick Hudson <[email protected]>, Date: Wed, 15 Jan 2014 09:46:06 +0000

> On 01/15/14 05:07, Ryo ONODERA wrote:
>> Hi,
>>
>> Thanks for your reply.
>>
>> From: Nick Hudson <[email protected]>, Date: Tue, 14 Jan 2014 17:27:12
>> +0000
>>
>>> On 01/14/14 16:18, Ryo ONODERA wrote:
>>>> Hi,
>>>>
>>>> I have tried to boot NetBSD/hp700 current of 201401091000Z in nyftp.
>>>> And I have gotten the following messages.
>>>> I am using SYSNBSD.
>>> It works for me here on my hp715/50 with 192MB.
>>>> NetBSD/hp700 5.2 and 5.2.1 do not boot properly.
>>> How do they fail?
>> Sorry, it is typo. 5.2 and 5.2.1 works fine for me.
>> # my fix e-mail is vanished...
>>
>>>> dmesg of 5.2 is here.
>>>> http://www.netbsd.org/~ryoon/20130202-NetBSD-hp700-on-HP9000-715-100-dmegs.txt
>>>> My machine is HP-900 715/100.
>>>>
>>>> I will offer any information.
>>>> Could anyone handle this problem?
>>>>
>>>> If this problem is solved, I want to run pkgsrc pbulk on this machine.
>>>>
>>>> Thank you.
>>>>
>>>>>> NetBSD/hp700 LIF/FFS/LFS Boot, Revision 1.4 (Thu Jan 9 09:49:17 EST
>>>>>> 2014)
>>>>>> Enter "reset" to reset system.
>>>> Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
>>>> 9618356+274304+356480 [349888+338067]=0xb42608
>>>> Start @ 0x200000 [1=0xc9a000-0xd42608]...
>>> iirc, The following is the PDC reporting something went badly wrong.
>> Hmm...
> 
> Can you specify '-d' at the boot prompt and drop into debugger? This
> will help a lot with finding what's going wrong

I have specify "-d" or "lf0a:netbsd -d", but kernel dies before debugger
invocation in both case.

I will create the kernel that has "options DIAGNOSTIC" and "options DEBUG".
And boot with it.


----------------------------------------------------------------------------
BootRom Version    1.4
Memory Size:  48 MB
----------------------------------------------------------------------------




(c) Copyright 1990-1994, Hewlett-Packard Company.
All rights reserved

Press <ESCAPE> to stop boot sequence.
----------------------------------------------------------------------------
Command                                Description
-------                                -----------
Auto [boot|search] [on|off]            Set/show auto mode
Boot [pri|alt [isl]]                   Boot from primary or alternate path
Boot [scsi|eisa.<slot>[.<addr>]] [isl] Boot from SCSI or EISA
Boot lan[.<addr>] [install] [isl]      Boot from LAN
Chassis [on|off]                       Set/show chassis codes display mode
DefaultSS                              Reboot and set EEPROM to default values
Diagnostic [on|off]                    Set/show diagnostic boot mode
Fastboot [on|off]                      Set/show fast boot mode
Help                                   Show this command menu
Information                            Show system information
LanAddress                             Show LAN station addresses
Monitor [<DEV>[.<type>]]               Set/show graphics monitor type
                                       (<DEV>=graphics|graphics_<1|2>)
Path [pri|alt [<DEV>[.<addr>]]]        Set/show boot source path
                                       (<DEV>=lan|scsi|eisa.<slot>)
Path [console [<DEV>[.<parm>]]]        Set/show boot console path
                                       (<DEV>=<RS232>|<GRAPH>
                                        <RS232>=rs232|rs232_2
                                        <parm>=<baud>.<length>.<parity>
                                        <GRAPH>=graphics|graphics_<1|2>
                                        <parm>=<monitor>)
Path [keyboard [hil|ps2]]              Set/show boot keyboard path
Pim [hpmc|toc|lpmc]                    Show PIM info
Search [ipl] [scsi|eisa]               Show potential boot devices
Search [ipl] [lan [install]]           Show potential boot LAN devices
Secure [on|off]                        Set/show security mode
----------------------------------------------------------------------------
BOOT_ADMIN> boot lan




Attempting to boot.

Loading Initial Program Loader


IPL successfully loaded


Booting



>> NetBSD/hp700 LIF/FFS/LFS Boot, Revision 1.4 (Thu Jan  9 09:49:17 EST 2014)
>> Enter "reset" to reset system.
Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :- lf0a:netbsd -d
9618356+274304+356480 [349888+338067]=0xb42608
Start @ 0x200000 [1=0xc9a000-0xd42608]...

GRs

0x00000000
0x02FFFFC0
0x0051DDF4
0x03000000
0x00000000
0x00C41D40
0x00C381E0
0x00C91000
0x00000001
0x00A1B800
0x00A1B800
0x00C38504
0x00000000
0x00A1B800
0x00A1B800
0x0013A2C8
0x0012A2C8
0x001C0100
0x00000014
0x00A1E800
0x00552BE4
0x00000000
0x004F7264
0x00000000
0x00000000
0x68707061
0x00000000
0x00C00000
0xFFFFFF10
0x00D462C0
0x03000080
0x0051DDF4

CRs

0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000002
0x00000002
0x000000C0
0x00000010
0x00000000
0x00000000
0x00203000
0x00000000
0x22863706
0x00000000
0x004F7284
0x0C6D1298
0x00000000
0x0300000C
0x0000FC09
0x00000000
0x00C381E0
0x00000400
0x00000000
0x0900DEEE
0xAAAAAAAA
0xF0002000
0x00D45000
0xF00EFFFF

SRs

0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000

OTHER

0x00000000
0x004F7288
0x20000000
0x9E000004
0x00000000
0x00000000
0x00000000
0x00310000
0x00000000
0x00000000
0x00000000
0x03000018
0xFFFBE000
0x00000000
0x00000002
0x301048FE
0x0001246D

--
Ryo ONODERA // [email protected]
PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3