AW: Jornada 720 with 128MB RAM

"Stefan Lehner" <[email protected]> Tue, 22 Oct 2019 09:44:56 +0200
Newsgroups gmane.os.netbsd.ports.hpcarm
Message-ID <001601d588ac$99de41d0$cd9ac570$@at>
Hi!
Thank you for your answer. Timing is the same as the old chips. With =
only
64MB RAM used, everything is alright ... Maybe i should dig deeper =
through
the device specific source code.

Regards=20
Stefan

-----Urspr=FCngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] =
Im
Auftrag von Robert Swindells
Gesendet: Montag, 21. Oktober 2019 13:11
An: Stefan Lehner
Cc: [email protected]
Betreff: Re: Jornada 720 with 128MB RAM


"Stefan Lehner" <[email protected]> wrote:
>My name ist Stefan, i like to upgrade my Jornada 720 to 128MB RAM.=20
>
>I soldered two Samsung K4S511632C-KC75 RAM Chips instead oft the two =
old
>16MB ones on to the RAM/ROM board. So the hardware part is done, the
>J720 boots fine into WinCE and with the hpcboot.exe into NetBSD. But as
>expected only with 32MB available.

The first thing that I would check is whether the required timings
for the new RAM chips are different to the old ones.