Re: pcmcia usb card?
"giacomo \"giotti\" mariani" <[email protected]> Wed, 10 Jun 2009 13:08:52 +0200
| Newsgroups | gmane.os.netbsd.ports.hpcmips |
|---|---|
| Message-ID | <[email protected]> |
Ignoring: > On 3/18/06, Andy Ruhl <acruhl@xxxxxxxxx> wrote: > >/ Does anyone know of a pcmcia usb card that can be used with a/ > >/ Mobilepro? I'm considering getting a Mobilepro 780 and unlike my 880,/ > >/ it does not have USB. Most of the USB cards I find are cardbus so that/ > >/ won't work./ > > > >/ Thanks./ > > > >/ Andy/ > > > I had been searching for one for a while for a 16-bit PCMCIA USB > adapter for my MobilePro 780, but it seems like, although possible, > nobody really got around to making them because of some chipset issue. > I can't be certain that are are *no* non-cardbus PCMCIA USB adapters, > but I haven't heard of any. If you find one, please tell me the > brand/model and where you found it. > > -Elijah > Yes, the Ratoc CFU1U is a CF card (8-bit) and uses the slhci driver > (SL811HS chip). The in tree driver doesn't work, but I have an updated > version that does that I have been working on occasionally for a few years > :/. However, if you want USB you would be much better off getting a > system with ohci (even if you already had one without it) since the chip > is slow and has some bugs (such as not working with low speed devices > connected to a hub). It does not support isochronous transfers, so no > audio. The Ratoc card is expensive, too. Cypress has a newer chip that > would potentially be better, but the errata includes some serious issues. > > Matthew Orgass > darkstar@xxxxxxxxxxxx Some time ago I bought: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=300315625021 for the same reason. It fit in my nec mobilepro 780 (so I think that it can work with it, as explained here http://en.wikipedia.org/wiki/Cardbus#CardBus about the notch), but the OS (netbsd 3.1) does not react when I insert it or some USB device in the adapter (no dmesg variations). I would like to know for sure (if someone know): -is it possible to use a cardbus with the mobilepro? -is it possible to use it with netbsd and, if yes, in which release where the drivers introduced? Thank you very much Giacomo -- /_\ The ASCII Per comunicare in modo riservato: \_/ Ribbon Campaign gpg --keyserver pool.sks-keyservers.net \ X Against HTML --recv-keys 20611EAD /_\ Email! ---------------------------------------------------------------------- Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html