Re: Workpad Z50 unable to detect/use Microdrive ?
Larry Stotler <[email protected]> Mon, 27 Apr 2015 17:28:54 -0400
| Newsgroups | gmane.os.netbsd.ports.hpcmips |
|---|---|
| Message-ID | <CADwjxuTKnLjGDGfLED6kpDdoFFEXH_A6T4Z5ntD56HyMmYuYWg@mail.gmail.com> |
On Mon, Apr 27, 2015 at 1:09 PM, Warner Losh <[email protected]> wrote: > I=E2=80=99ve had issues with micro drives on these embedded platforms not= having > enough power to work right. Never used the model you are using, though, > so I don=E2=80=99t know if that=E2=80=99s what=E2=80=99s going south or n= ot. While the spec says they > should work, the early hand held devices, like the one you have, were > notoriously underpowered, leading to many weird things when you tried > to put generic hardware in. I found out that the white label Hitachi Microdrives are "tru IDE" drives, and won't work as memory devices. A blue label drive is required to use it in the Z50. I was unable to get the white label microdrives to work in my Thinkpad X21 either. They work fine in my Thinkpad T60p's Advanced Dock, evidently because the dock supports it. Cheapest 6GB blue label Drive I found was $40 so I doubt I will bother with it. I will try to source a PCMCIA to CF adapter & see if that works. Don't know if it will tho. Tru IDE drives use DMA, which I doubt the Z50 has the ability to do, PCMCIA or CF. > Don=E2=80=99t have my Z50 anymore, or I=E2=80=99d give a spin... I just picked up a second one. I was hoping it had the 32MB RAM upgrade because it came with the Dock & Serial Cable, but it didn't. Oh well. Spare parts. Oh course, both of the adapters I have were part of the recall, which I doubt they would honor anymore........