Re: Seeking hpcsh kernel binary with ep driver
"Jared D. McNeill" <[email protected]> Wed, 23 Jan 2008 18:58:56 -0500
| Newsgroups | gmane.os.netbsd.ports.hpcsh |
|---|---|
| Message-ID | <[email protected]> |
Martin Carpenter wrote: > On Wed, 2008-01-23 at 17:43 -0500, Jared D. McNeill wrote: > >> Please try the following kernel: >> >> ftp://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/netbsd-4.0-GENERIC-hpcsh.gz > > Wow, thanks! > > The card is recognised and configured now, but as soon as dhclient tries > to do it's thing I see this repeatedly on the console: > > ep0: adapter failure (2003) > > I seem to be experiencing the same problem as described here by M > Ramakers: > > http://mail-index.netbsd.org/netbsd-bugs/2005/12/21/0023.html > > including the same error (sendto: host down) if I try static IP > configuration and pinging my gateway. The gateway never sees any packets > from the Jornada. I have exactly the same card (3Com Etherlink III, > 3C589D-TP) as described in the above mailing list message. > > This is PR 32356: > > http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=32356 That's a bummer :/ I think the last time I used ep was in the pre-3.0 days, before tripping over the network cable and breaking the clips on the dongle. I've since replaced it with an ne and wi. If you remove and re-insert the card after bootup has completed, do you see the same behaviour? Cheers, Jared