Re: Boot hang on Jornada 690
Björn Johannesson <[email protected]> Tue, 10 Mar 2020 19:00:47 +0000 (UTC)
| Newsgroups | gmane.os.netbsd.ports.hpcsh |
|---|---|
| Message-ID | <[email protected]> |
Hi. > On Tuesday, March 10, 2020, 01:57:55 AM GMT+1, Jarom=C3=ADr Dole=C4=8Dek = <[email protected]> wrote: > Bjorn, can you send me the full dmesg of old and new kernel? Sure. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, = =20 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019 [email protected]:/usr/src/sys/arch/hpcsh/compile/GENERIC HP Jornada 690 (European) total memory =3D 32768 KB avail memory =3D 27280 KB timecounter: Timecounters tick every 15.625 msec mainbus0 (root) cpu0 at mainbus0: SH3 132.706 MHz PCLOCK 22.117 MHz cpu0: 16KB/16B 4-way set-associative I/D-unified cache. cpu0: U0, P0, P3 write-back; P1 write-back cpu0: 4-way set-associative 128 TLB entries cpu0: VPN mode, multiple virtual storage mode btnmgr0 at mainbus0 wskbd2 at btnmgr0 mux 1 shb0 at mainbus0 rtc0 at shb0 scif0 at shb0 scif0: console adc0 at shb0 j6x0pwr0 at adc0 j6x0tp0 at adc0 wsmouse0 at j6x0tp0 mux 0 wskbd1 at j6x0tp0 mux 1 j6x0lcd0 at shb0: brightness 28, contrast 11 hd64461if0 at shb0 hd64461video0 at hd64461if0: frame buffer =3D 512 KB hpcfb0 at hd64461video0 wsdisplay0 at hpcfb0 kbdmux 1 wsmux1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wskbd1: connecting to wsdisplay0 hpcfb: 640x240 pixels, 65536 colors, 80x24 chars hpcfb: 640x240 pixels, 65536 colors, 80x24 chars hpcfb: 640x240 pixels, 65536 colors, 80x24 chars hpcfb: 640x240 pixels, 65536 colors, 80x24 chars wsdisplay0: screen 0-3 added (std, vt100 emulation) hd64461pcmcia0 at hd64461if0 com0 at hd64461if0: device problem. don't attach. pfckbd0 at mainbus0 hpckbd0 at pfckbd0 wskbd0 at hpckbd0 mux 1 wskbd0: connecting to wsdisplay0 hpcapm0 at mainbus0: pseudo power management module apmdev0 at hpcapm0: Power Management spec V1.2 timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0 timecounter: Timecounter "tmu_pclock_4" frequency 5529389 Hz quality 0 pcmcia0 at hd64461pcmcia0 wi0 at pcmcia0 function 0: <NETGEAR MA401RA Wireless PC, Card, ISL37300P, E= val-RevA> wi0: 802.11 address 00:09:5b:49:33:8d wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA) wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6) wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps pcmcia1 at hd64461pcmcia0 wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6> wdc0: memory mapped mode atabus0 at wdc0 channel 0 wd0 at atabus0 drive 0 wd0: <SanDisk SDCFX-1024> wd0: drive supports 4-sector PIO transfers, LBA addressing wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors wd0: drive supports PIO mode 4 WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=3D/stand/hpcsh/8.1/modules Enter pathname of shell or RETURN for /bin/sh: Terminal type? [unknown] xterm Terminal type is xterm. We recommend that you create a non-root account and use su(1) for root acce= ss. # exit --> Normal startup here <-- 9.0 follows. [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003= , 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 20= 15, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights= reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights= reserved. [ 1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020 [ 1.0000000] [email protected]:/usr/src/sys/arch/hpcsh/compile/= GENERIC [ 1.0000000] HP Jornada 690 (European) [ 1.0000000] total memory =3D 32768 KB [ 1.0000000] avail memory =3D 27012 KB [ 1.0000000] timecounter: Timecounters tick every 15.625 msec [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: SH3 132.696 MHz PCLOCK 22.117 MHz [ 1.0000000] cpu0: 16KB/16B 4-way set-associative I/D-unified cache [ 1.0000000] cpu0: U0, P0, P3 write-back; P1 write-back [ 1.0000000] cpu0: 4-way set-associative 128 TLB entries [ 1.0000000] cpu0: VPN mode, multiple virtual storage mode [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd2 at btnmgr0 mux 1 [ 1.0000000] shb0 at mainbus0 [ 1.0000000] rtc0 at shb0 [ 1.0000000] scif0 at shb0 [ 1.0000000] scif0: console [ 1.0000000] adc0 at shb0 [ 1.0000000] j6x0pwr0 at adc0 [ 1.0000000] j6x0tp0 at adc0 [ 1.0000000] wsmouse0 at j6x0tp0 mux 0 [ 1.0000000] wskbd1 at j6x0tp0 mux 1 [ 1.0000000] j6x0lcd0 at shb0: brightness 28, contrast 11 [ 1.0000000] hd64461if0 at shb0 [ 1.0000000] hd64461video0 at hd64461if0: frame buffer =3D 512 KB [ 1.0000000] hpcfb0 at hd64461video0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] wsmux1: connecting to wsdisplay0 [ 1.0000000] wskbd2: connecting to wsdisplay0 [ 1.0000000] wskbd1: connecting to wsdisplay0 [ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars [ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars [ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars [ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars [ 1.0000000] wsdisplay0: screen 0-3 added (std, vt100 emulation) [ 1.0000000] hd64461pcmcia0 at hd64461if0 [ 1.0000000] com0 at hd64461if0: device problem. don't attach. [ 1.0000000] pfckbd0 at mainbus0 [ 1.0000000] hpckbd0 at pfckbd0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] wskbd0: connecting to wsdisplay0 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000000] timecounter: Timecounter "clockinterrupt" frequency 64 Hz qu= ality 0 [ 1.0000070] timecounter: Timecounter "tmu_pclock_4" frequency 5529413 Hz= quality 0 [ 1.4077519] pcmcia0 at hd64461pcmcia0 [ 4.4077521] wi0 at pcmcia0 function 0: <NETGEAR MA401RA Wireless PC, Car= d, ISL37300P, Eval-RevA> [ 4.4554814] wi0: 802.11 address 00:09:5b:49:33:8d [ 4.6902770] wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA) [ 4.7204875] wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6) [ 4.7595471] wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 5.5640027] pcmcia1 at hd64461pcmcia0 [ 8.5640032] wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6> [ 8.5990520] wdc0: memory mapped mode [ 9.1108873] atabus0 at wdc0 channel 0 [ 9.1265606] wd0 at atabus0 drive 0 [ 9.1433432] wd0: <SanDisk SDCFX-1024> [ 9.1704108] wd0: drive supports 4-sector PIO transfers, LBA addressing [ 9.2094334] wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 200= 1888 sectors [ 9.2557991] wd0: drive supports PIO mode 4WARNING: 1 error while detecti= ng hardware; check system log. [ 9.6985855] boot device: wd0 [ 13.0796288] root on wd0a dumps on wd0b [ 16.0796292] wd0a: error reading fsbn 128 of 128-143 (wd0 bn 102944; cn 5= 0 tn 17 sn 0), xfer f5c, retry 0 [ 16.0796292] wd0: (aborted command) <-- Hangs here. Only difference I can see at a glance is that there is a linebreak missing = before "WARNING: 1 error [...]" Per David's suggestion I also tried -current with the same result as 9.0. (= Sorry for the delay.) /B