Re: bootloader hangs on IBM x306 w/2 SATA disks
"John D. Baker" <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.i386 |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 27 Jul 2017 20:36:57 -0400 (EDT), Mouse <[email protected]> wrote: > > Check the BIOS settings, especially if the 40G disk is PATA instead Both disks are SATA. For the 1U chassis, the x306 board has only 2 SATA ports populated (of 4 possible). It also has a PATA interface for the CD drive. Dropping into BIOS setup was the first thing I did after powering up the machine with the second drive installed. It showed each disk plugged into the expected port. (There was some confusion before I realized the BIOS enumerates from 0 but the planar silkscreen enumerates from 1 and the BIOS shows both designations.) The system uses "piixide(4)". Channel 0 is implemented as the PATA interface and channel 1 handles the SATA ports. A couple of oddities: The BIOS hard-disk boot order selection defaulted to the disk on the second SATA port first. Also, although there are only the two disks, one of them shows up twice in the hard-disk order selection. (I forget now whether the behavior followed the disk or the port to which it was attached.) > > Another thing to try is just straight-up waiting. I think ATA has > > a 30-second timeout at some points, which is a loooong time when I let it sit for over an hour with no progress. > > I'll see if a bootable CD using some other bootloader has any > > trouble. > If my guess above is right, it'll either (a) not work at all because > the CD is behind the confused hardware or (b) work like PXE booting: > kernel loads and wedges trying to access the disks. I booted a gPartEd-live CD which uses ISOLinux. It got as far as the primary bootloader, splashscreen, and menu. After that the screen went black with only a blinking underline cursor in the upper left corner. This is the same behavior as the NetBSD MBR Boot on the disks. -- |/"\ John D. Baker, KN5UKS NetBSD Darwin/MacOS X |\ / jdbaker[snail]mylinuxisp[flyspeck]com OpenBSD FreeBSD | X No HTML/proprietary data in email. BSD just sits there and works! |/ \ GPGkeyID: D703 4A7E 479F 63F8 D3F4 BD99 9572 8F23 E4AD 1645