Re: Trying to fix my broken MIPS CI20
Lwazi Dube <[email protected]> Fri, 7 Jul 2023 14:25:01 -0400
| Newsgroups | gmane.os.netbsd.ports.mips.devel |
|---|---|
| Message-ID | <CAA7X57BTQvtbmizasicRPugXsXRgvNL4pf70UammxaW7XrF1gg@mail.gmail.com> |
Just the dmesg: [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.99.4 (CI20) #2: Fri Jul 7 12:30:41 EDT 2023 [ 1.000000] lwazi@pc:/data/netbsd/head/src/sys/arch/evbmips/compile/obj/CI20 [ 1.000000] Ingenic XBurst [ 1.000000] total memory = 1024 MB [ 1.000000] avail memory = 1008 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0: 1200.00MHz (hz cycles = 120000, delay divisor = 12) [ 1.000000] cpu0: Ingenic XBurst (0x3ee1024f) Rev. 79 with unknown FPC type (0x330000) Rev. 0 [ 1.000000] cpu0: 32 TLB entries, 16MB max page size [ 1.000000] cpu0: 32KB/32B 8-way set-associative L1 instruction cache [ 1.000000] cpu0: 32KB/32B 8-way set-associative write-back L1 data cache [ 1.000000] cpu0: 256KB/128B 8-way set-associative write-back L2 unified cache [ 1.000000] apbus0 at mainbus0 [ 1.000000] JZ_CLKGR0 3f5c7fe0 [ 1.000000] JZ_CLKGR1 000073e0 [ 1.000000] JZ_SPCR0 00000000 [ 1.000000] JZ_SPCR1 00000000 [ 1.000000] JZ_SRBC 00000002 [ 1.000000] JZ_OPCR 000015e6 [ 1.000000] JZ_UHCCDR c0000000 [ 1.000000] JZ_ERNG 00000001 [ 1.000000] JZ_RNG 92889680 [ 1.000000] efuse0 at apbus0 addr 0x134100d0: Ingenic EFUSE Slave Interface [ 1.000000] com0 at apbus0 addr 0x10030000 irq 51: Ingenic UART, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at apbus0 addr 0x10031000 irq 50: Ingenic UART, 16-byte FIFO [ 1.000000] com2 at apbus0 addr 0x10032000 irq 49: Ingenic UART, 16-byte FIFO [ 1.000000] com3 at apbus0 addr 0x10033000 irq 48: Ingenic UART, 16-byte FIFO [ 1.000000] com4 at apbus0 addr 0x10034000 irq 34: Ingenic UART, 16-byte FIFO [ 1.000000] dwctwo0 at apbus0 addr 0x13500000 irq 21: USB OTG controller [ 1.000000] ohci0 at apbus0 addr 0x134a0000 irq 5: OHCI USB controller [ 1.000000] ohci0: OHCI version 1.0 [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ehci0 at apbus0 addr 0x13490000 irq 20: EHCI USB controller [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 1 companion controller, 1 port: ohci0 [ 1.000000] ehci0: Using DMA subregion for control data structures [ 1.000000] usb1 at ehci0: USB revision 2.0 [ 1.000000] dme0 at apbus0 addr 0x16000000: DM9000 Ethernet controller [ 1.000000] dme0: DM9000 was configured with MAC address: ba:ba:be:ef:fe:ed [ 1.000000] jzgpio at apbus0 addr 0x10010000 not configured [ 1.000000] jzgpio at apbus0 addr 0x10010100 not configured [ 1.000000] jzgpio at apbus0 addr 0x10010200 not configured [ 1.000000] jzgpio at apbus0 addr 0x10010300 not configured [ 1.000000] jzgpio at apbus0 addr 0x10010400 not configured [ 1.000000] jzgpio at apbus0 addr 0x10010500 not configured [ 1.000000] jziic0 at apbus0 addr 0x10050000 irq 60: SMBus controller [ 1.000000] iic0 at jziic0: I2C bus [ 1.000000] jziic1 at apbus0 addr 0x10051000 irq 59: SMBus controller [ 1.000000] iic1 at jziic1: I2C bus [ 1.000000] jziic2 at apbus0 addr 0x10052000 irq 58: SMBus controller [ 1.000000] iic2 at jziic2: I2C bus [ 1.000000] jziic3 at apbus0 addr 0x10053000 irq 57: SMBus controller [ 1.000000] iic3 at jziic3: I2C bus [ 1.000000] jziic4 at apbus0 addr 0x10054000 irq 56: SMBus controller [ 1.000000] iic4 at jziic4: I2C bus [ 1.000000] pcf8563rtc0 at iic4 addr 0x51: NXP PCF8563 Real-time Clock [ 1.000000] jzmmc at apbus0 addr 0x13450000 not configured [ 1.000000] jzmmc at apbus0 addr 0x13460000 not configured [ 1.000000] jzmmc at apbus0 addr 0x13470000 not configured [ 1.000000] jzfb at apbus0 addr 0x13050000 not configured [ 1.000000] jzrng0 at apbus0 addr 0x100000dc: Ingenic random number generator [ 1.000000] dwctwo0: Core Release: 3.00a (snpsid=4f54300a) [ 1.000000] usb2 at dwctwo0: USB revision 2.0 [ 1.000000] entropy: ready [ 1.000000] timecounter: Timecounter "Ingenic OS timer" frequency 12000000 Hz quality 100 [ 1.000003] starting timer interrupt... [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.023484] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.023484] uhub0: 1 port with 1 removable, self powered [ 1.023484] uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.038874] uhub1: 1 port with 1 removable, self powered [ 1.038874] uhub2 at usb2: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.047885] uhub2: 1 port with 1 removable, self powered [ 2.093519] uhub3 at uhub1 port 1: vendor 05e3 (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/7.02, addr 2 [ 2.093519] uhub3: single transaction translator [ 2.107342] uhub3: 4 ports with 4 removable, self powered [ 3.263559] umass0 at uhub3 port 1 configuration 1 interface 0 [ 3.263559] umass0: Lexar (0x05dc) USB Flash Drive (0xc75c), rev 2.00/1.02, addr 3 [ 3.277385] umass0: using SCSI over Bulk-Only [ 3.277385] scsibus0 at umass0: 2 targets, 1 lun per target [ 3.683573] sd0 at scsibus0 target 0 lun 0: <Lexar, USB Flash Drive, 8.07> disk removable [ 3.693574] sd0: fabricating a geometry [ 3.693574] sd0: 7646 MB, 7646 cyl, 64 head, 32 sec, 512 bytes/sect x 15659008 sectors [ 3.704495] root on dme0 [ 3.707181] nfs_boot: trying static [ 3.707181] nfs_boot: client_addr=192.168.2.77 [ 3.715070] nfs_boot: gateway=192.168.2.80 [ 3.715070] nfs_boot: netmask=255.255.255.0 [ 3.715070] nfs_boot: server=192.168.2.80 [ 3.727287] nfs_boot: root=192.168.2.80:/work/rootfs/ci20 [ 6.723672] root on 192.168.2.80:/work/rootfs/ci20 [ 6.723672] kern.module.path=/stand/evbmips/10.99.4/modules [ 619.654105] sd0: fabricating a geometry