Re: Rx3230 MIPS install question

In message: <[email protected]>
            Wayne Knowles <[email protected]> writes:
: On Sun, 10 Nov 2002, M. Warner Losh wrote:
: 
: > I have a 3230 that I'd like to get runing NetBSD.  I have no big
: > endian NetBSD machines.  I have RiskOS running on the machine now.  It
: > has the typicall 2 200MB disks in it.  I have a few 1G narrow disks
: > that I'll replace the 200M disks with once I get NetBSD running on the
: > machine.
: >
: > It boots right now, but only if i remove the color video card (it
: > hangs testing it, maybe I'm impatient), so I can manipulate the disks
: > from RISC/OS realtively easily.
: >
: > Are the instructions that are in
: > 	http://mail-index.netbsd.org/port-mipsco/2002/09/16/0000.html
: > still the most up to date?
: 
: Yes, that install procedure is still current.

OK.  Is the raw partition really 10?  I did the following:

# dd if=diskimage of=/dev/dsk/sdc0d2s10 bs=32k
# shutdown -i0 -g0 -y

The system is down.

Rx3230 MIPS Monitor: Version 5.42 OPT Thu Mar 7 14:18:57 PST 1991 root
Memory size: 16777216 (0x1000000) bytes, 16 MB
Icache size: 32768 (0x8000) bytes
Dcache size: 32768 (0x8000) bytes
>> boot dksd(,2,8)boot
210192+58672+230560 entry: 0xa0600000
Standalone Shell: Version 5.03 OPT Tue Jan 15 07:37:34 PST 1991 root

Loading dksd(,2,8)boot
6480
attempt to overlay sash text, data, or bss
Can't load dksd(,2,8)boot
sash: 

Ideas?  Or should I just dd it with on a different system where I know
the 'raw' partition :-0.

Warner