diskless mvme68k

hi!
I need to use a diskless mvme167 board. I tried to set up my linux pc
(slackware 9.0) as server following the Diskless Howto, note that there aren't
specific instructions for mvme68k.

The board gets some informations from the server and then stops, the is the
output:


167-Bug>nbo
Network Booting from: VME167, Controller 0, Device 0
Loading: /tftpboot/netboot

Client IP Address      = 10.0.0.3
Server IP Address      = 10.0.0.1
Gateway IP Address     = 10.0.0.1
Subnet IP Address Mask = 255.255.255.0
Boot File Name         = /tftpboot/netboot
Argument File Name     =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&25148, Bytes Loaded =&25148
Bytes/Second   =&25148, Elapsed Time =1 Second(s)
>> NetBSD/mvme68k MVME167 netboot (via /tftpboot/netboot) [1.5]
device: ie0 attached to 08:00:3e:22:17:aa
net_open: client addr: 10.0.0.3
net_open: subnet mask: 255.255.255.0
net_open: server addr: 192.167.203.159
net_open: server path: 192.167.203.159:/tftpboot/10.0.0.3/
net_open: file name: /tftpboot/netbsd-VME167
net_open: NFS mount error=-1
open netbsd: Unknown error: code -1
boot: netbsd: Unknown error: code -1
boot:
netboot: no interfaces left untried
167-Bug>
167-Bug>


can anyone help me?
any news about the specific mvme68k howto??

thanks

peppe



****************************************************************************
Dr. Giuseppe Pesce                      * phone   +39 081 676274
Dipartimento Scienze Fisiche            * fax     +39 081 676346
Universita' di Napoli ''Federico II''   *
Complesso universitario Monte S.Angelo  * e-mail: [email protected]
Via Cintia  80126 NAPOLI, ITALY          *
****************************************************************************
                      one man's hell is another man's heaven