Re: Trouble netbooting MVME167B

On Thu, 14 Aug 2003, Steve Woodford wrote:

> I suspect you need to configure the 167's VME A32D32 master window. Use
> Bug's "env" command, and check the following settings:
>
> 	Master Enable #1 [Y/N] = Y?
> 	Master Starting Address #1 = 02000000?
> 	Master Ending Address #1   = EFFFFFFF?
> 	Master Control #1 = 0D?
>
> Master Enables #2 - #4 should all be N (for off).

same config here.

> You may also want to double-check that your VME RAM cards are set for the
> A32D32 address space

It can always do A32. The behaviour does not change if I jumper it to
enable/disable A24 decodes.