Re: next86k bootp hangs

I'm not sure if this is related, but I've found that the NeXT firmware
does not respond to ARP requests from the boot server.  For me, it fails
after receiving the bootp reply but before tftp'ing the bootloader.  The
fix is to add a permanent arp entry on the boot server (assuming they are
on the same subnet) with 'arp -s <ipaddr> <etheraddr>'.

On Fri, Oct 13, 2006 at 02:40:22AM -0500, Jaime A Fournier wrote:
> It seems to boil down to
> src/sys/net/if.c:1581
>                 error = ((*so->so_proto->pr_usrreq)(so, PRU_CONTROL,
>                     (struct mbuf *)cmd, (struct mbuf *)data,
>                     (struct mbuf *)ifp, p));
> It hangs here and does not continue.
> Can't figure out what it's trying to do here, but thought I would publish 
> what I have found so far.
> 
> 
> -Ober
> 
> 
> On Fri, 13 Oct 2006, Jaime A Fournier wrote:
> 
> >Date: Fri, 13 Oct 2006 01:10:49 -0500 (CDT)
> >From: Jaime A Fournier <[email protected]>
> >To: [email protected]
> >Subject: next86k bootp hangs 
> >
> >
> >I have isolated the line where the kernel hangs.
> >
> >The dmesg ends at:
> >boot device: xe0
> >root on xe0
> >mountroot: trying nfs...
> >nfs_boot: trying DHCP/BOOTP
> >
> >You can not break into ddb via NMI when it hangs.
> >
> >The last call is makes is the following:
> >
> >src/sys/nfs/nfs_boot.c:280
> >
> >      error = ifioctl(so, SIOCAIFADDR, (caddr_t)&iareq, procp);
> >
> >On 1.6.2 the nfs_boot line is followed by:
> >     in6_ifattach: xe0 is not multicast capable, IPv6 not enabled
> >
> >Will keep digging, just wanted to submit what I have found so far.
> >
> >
> >
> >-Ober
> >