re: Pegasos boots with 512MB! (was: SmartFirmware /memory)

   
   On 26-Mar-2008 Frank Wille wrote:
   > Based on the code of Matthew Green I inserted the following block into
   > mem_regions():
   
   I suspect that this should only be done with the pegasos, as other machines are
   unlikely to have this problem.  Other than that though, it looks ok.
   
   Change printf to aprint_normal though.


my system with 1GB installed doesn't boot :-(  i get:


4235752+293400 [208336+202668]=0x4b6598
 start=0x100000
WARNING: add memory segment 10000000 - 40000000,
WARNING: which was not recognized by the Firmware.
trap type f00 at 327e50
Press a key to panic.
panic: trap
Stopped in pid 0.1 (system) at  netbsd:cpu_Debugger+0x10:       lwz     r0, r1, 0x14
db> bt
0x005bcc60: at panic+0x288
0x005bccc0: at trap+0x130
0x005bcdb0: kernel PERF trap by pool_cache_bootstrap+0xd0: srr1=0x1032 r1=0x5bce70 cr=0x24002042 xer=0x20000000 ctr=0
0x005bce70: at pool_cache_bootstrap+0x54
0x005bcea0: at uvm_amap_init+0x58
0x005bcec0: at uvm_init+0x3c
0x005bcee0: at main+0x3c
0x005bcf30: at 0x1000b4

i'll pull 512mb out (i have 2x512) and see how that goes.


.mrg.