Hi all.
I've a DECstation 3100 with a full 24Mb RAM, I've hooked up an RRD42
(SCSI ID4) and an old RZ24-E (SCSI ID 2) and am trying to get
NetBSD/pmax 1.6.2 booting, but I am getting the follwing error on
booting the CD I burnt :
>> boot -f rz(0,4,0)
NetBSD/pmax 1.6.2 ISO 9660 Primary Bootstrap
NetBSD/pmax 1.6.2 Secondary Bootstrap, Revision 1.5
([email protected], Wed Feb 11 03:41:22 UTC 2004)
Boot: rz(0,4,0)
Loading: rz(0,4,0)netbsd.pmax
4409136-
Excptn: <vtr=NRML>
Excptn pc: 0x80718344
Creg: 0x1000001c<CE=1,EXC=DBE>
Sreg: 0x30080000<CU1,CU0,CM,IPL=8>
Sp: 0x8070f630
exit(-1)
KN01 V7.02
08-00-2b-23-19-86
0x01800000
>>
Any clues?
ta,
greg
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.