7248: still clueless

Sam Carleton <[email protected]>
Newsgroups gmane.os.netbsd.ports.prep
Message-ID <[email protected]>
As the subject says, i am still clueless.  I do have the
7248 booting off my i386 NetBSD firewall via bootp!  But
when it loads, I get the exact same error as when I boot
off of floppies:

init: not found
panic: no init

Now I am thinking that I might have the NFS server
configured the wrong way.  This is what I have:

bootptab:
---------------------------------------------------
ibmrs6k:\
    ht=ethernet:\
    ha=08005AFC541A:\
    ip=192.168.0.100:\
    bf=/sysinst.fs:\
    rp=/export/client/NetBSD-1.6.1/prep:\
    sa=192.168.0.1:

exports
---------------------------------------------------
/export/client/root -maproot=root:wheel    client.test.net
/export/client/swap -maproot=root:wheel    client.test.net
/export/client/usr  -maproot=nobody:nobody client.test.net
/export/client/home -maproot=nobody:nobody client.test.net

I got the exports stuff from following the steps in the
document:  Setting up the NFS server, Diskless NetBSD
HOW-TO

Sam
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.