IBM RS/6000 40P 6015 platform support
Klaus Klein <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.prep,gmane.os.netbsd.ports.powerpc |
|---|---|
| Message-ID | <[email protected]> |
Hi folks, I've just committed the remaining bits of IBM RS/6000 40P platform support to the tree, which is also the first machine supported in NetBSD using a PowerPC 601 processor. Still missing at this time is a driver for the included P9100-based framebuffer, but I'll get to that as well eventually. I've included a message buffer dump below. Have fun, - Klaus >> NetBSD/prep BOOT, Revision 1.5 >> ([email protected], Wed Jun 23 14:01:35 CEST 2004) Boot: Loading in() 2800960+357476 [157936+143517]=0x34ce10 start=0x100000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 2.0F (GENERIC) #18: Sat Jun 26 20:11:59 CEST 2004 [email protected]:/export/home/kleink/work/NetBSD/src/sys/arch/prep/compile/GENERIC Model: IBM PPS Model 6015 total memory = 32768 KB avail memory = 27352 KB mainbus0 (root) cpu0 at mainbus0: 601 (Revision 2), ID 0 (primary) cpu0: HID0 808000<BD,EM> pci0 at mainbus0 bus 0: direct-mapped configuration space access pci0: i/o space, memory space enabled pcib0 at pci0 dev 11 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x03) pcib0: PIRQ[0]=15 PIRQ[1]=15 siop0 at pci0 dev 12 function 0: Symbios Logic 53c810 (fast scsi) siop0: interrupting at irq 13 scsibus0 at siop0: 8 targets, 8 luns per target Weitek P9100 (VGA display) at pci0 dev 14 function 0 not configured isa0 at pcib0 lpt0 at isa0 port 0x3bc-0x3bf irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 we1 at isa0 port 0x300-0x31f iomem 0xe4000-0xe7fff irq 11 we1: WD8013EBT Ethernet (16-bit) we1: Ethernet address 10:00:5a:2d:68:7a pcppi0 at isa0 port 0x61 isabeep0 at pcppi0 mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock biomask 2000 netmask 2800 ttymask 2880 scsibus0: waiting 2 seconds for devices to settle... cd0 at scsibus0 target 5 lun 0: <PLEXTOR, CD-ROM PX-4XCE, 1.01> cdrom removable cd0: async, 8-bit transfers sd0 at scsibus0 target 6 lun 0: <IBM, DORS-31080, WA6A> disk fixed sd0: 1034 MB, 5357 cyl, 3 head, 131 sec, 512 bytes/sect x 2118144 sectors sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing boot device: <unknown> root on sd0a dumps on sd0b Sat Jun 26 21:59:46 CEST 2004 swapctl: adding /dev/sd0b as swap device at priority 0 Checking for botched superblock upgrades: done. Starting file system checks: /dev/rsd0a: file system is clean; not checking /dev/rsd0d: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. Hostname: we-the-jury.et.reziprozitaet.de IPv6 mode: autoconfigured host Configuring network interfaces: we1add net default: gateway 10.1.0.1 . Adding interface aliases: Sending router solicitation... Building databases... Starting syslogd. Checking for core dump... savecore: no core dump Setting date via ntp. Starting rpcbind. Mounting all filesystems... Clearing /tmp. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. starting local daemons:. Starting lpd. Updating motd. Starting ntpd. Starting sshd. Starting inetd. Starting cron. Sat Jun 26 22:00:35 CEST 2004 NetBSD/prep (we-the-jury.et.reziprozitaet.de) (console) login: root Password: Last login: Sat Jun 26 19:58:53 2004 on console Jun 26 22:01:15 we-the-jury login: ROOT LOGIN (root) ON console Jun 26 22:01:15 we-the-jury login: ROOT LOGIN (root) ON console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 2.0F (GENERIC) #18: Sat Jun 26 20:11:59 CEST 2004 Terminal type is vt100. We recommend creating a non-root account and using su(1) for root access. # ps PID TT STAT TIME COMMAND 394 00 Ss 0:00.44 -sh 395 00 R+ 0:00.05 ps #