RE: Announcing KuroBox support

Hello,

I don't have a console on my KuroBox and actually boot NetBSD via the Linux boot loader.

I have 2 questions regarding this email :
1. does this mean NetBSD can (know) run standalone on the Kurobox ?
2. does the box automatically boots on the network when no disk is installed ?

TIA,
  Jo

-----Message initial-----
De: Toru Nishimura <[email protected]>
Envoyé: dim. 30-05-2010 01:28
À: [email protected]; [email protected]; 
Sujet: Announcing KuroBox support

> NetBSD/sandpoint now supports KuroBox . It will continue
> to accumulate other models MPC8241/8245 based
> consumer grade NAS products.  Feature highlights;
> 
> - soft control power switch, which can works with
> powerd(8).
> - /dev/satmgr device useful to mimick all the functionality
> of the original NAS CGI.
> - DHCP/NFS bootable (diskboot feature will be added)
> - known good for Synology DS108g+ and KuroBox; tests
> on other models are under way.
> 
> The complete bootoff-powerdown sequence is shown
> below;
> 
> U-Boot 1.1.4 LiSt 2.1.0 (Sep 21 2006 - 00:22:56) LinkStation / KuroBox
> 
> CPU:   MPC8245 Revision 1.4 at 196.608 MHz: 16 kB I-Cache 16 kB D-Cache
> DRAM:  64 MB
> FLASH:  4 MB
>         00  0b  1317  0985  0200  ff
>         00  0c  1095  0680  0101  ff
>         00  0e  1033  0035  0c03  ff
>         00  0e  1033  0035  0c03  ff
>         00  0e  1033  00e0  0c03  ff
> Net:   COMET#0
> stdin :   serial
> stdout:   serial
> stderr:   serial
> IDE:   Bus 0: ...OK 
>   Device 0: Model: HDS728080PLAT20 Firm: PF2OA2AA Ser#: PFD219EJRD0G1E
>             Type: Hard Disk
>             Supports 48-bit addressing
>             Capacity: 78533.4 MB = 76.6 GB (160836480 x 512)
> => run diskless
> BOOTP broadcast 1
> DHCP client bound to address 192.168.24.66
> Using COMET#0 device
> TFTP from server 192.168.24.24; our IP address is 192.168.24.66
> Filename 'netboot.bin'.
> Load address: 0x1000000
> Loading: ############
> done
> Bytes transferred = 56784 (ddd0 hex)
> ## Starting application at 0x01000000 ...
> 
> >> NetBSD/sandpoint Boot, Revision maintainance
> >> (nisimura@paq17, Fri May 28 08:54:04 JST 2010)
> KuroBox, cpu 195 MHz, bus 97 MHz, 64MB SDRAM
> 1095.0680 IDE 00:12:00
> 1317.0985 NIC 00:11:00
> 00:00:00: chip 1057.0006 card ffff.ffff rev 14 class 06.00.00 hdr 00
> mem base 80000000 size 1000
> 00:11:00: chip 1317.0985 card 0000.0000 rev 11 class 02.00.00 hdr 00
> i/o base 1000 size 100
> mem base 80001000 size 1000
> 00:12:00: chip 1095.0680 card 1095.0680 rev 02 class 01.01.85 hdr 00
> i/o base 1100 size 10
> i/o base 1110 size 10
> i/o base 1120 size 10
> i/o base 1130 size 10
> i/o base 1140 size 10
> mem base 80002000 size 1000
> 00:14:00: chip 1033.0035 card 1033.0035 rev 43 class 0c.03.10 hdr 80
> mem base 80003000 size 1000
> 00:14:01: chip 1033.0035 card 1033.0035 rev 43 class 0c.03.10 hdr 00
> mem base 80004000 size 1000
> 00:14:02: chip 1033.00e0 card 1033.00e0 rev 04 class 0c.03.20 hdr 00
> mem base 80005000 size 1000
> MAC address 00:07:40:a4:48:6e
> 100Mbps-FDX
> loading "netbsd-NAS" 2873052+241652 [169872+162003]=0x349bb4
> entry=0x00090000, ssym=0x003886d0, esym=0x003d9bb4
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 5.99.29 (KUROBOX) #73: Sun May 30 07:02:39 JST 2010
>         nisimura@paq17:/store/HEAD/usr/src/sys/arch/sandpoint/compile/KUROBOX
> total memory = 65536 KB
> avail memory = 59708 KB
> OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
> mainbus0 (root)
> cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
> cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
> eumb0 at mainbus0
> com0 at eumb0 unit 1: ns16550a, working fifo
> com0: console
> ociic0 at eumb0
> iic0 at ociic0: I2C bus
> rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
> satmgr0 at eumb0 unit 0: button manager (kurobox)
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
> tlp0 at pci0 dev 11 function 0: ADMtek AN985 Ethernet, pass 1.1
> tlp0: interrupting at irq 16
> tlp0: Ethernet address 00:07:40:a4:48:6e
> ukphy0 at tlp0 phy 1: OUI 0x00e092, model 0x0001, rev. 1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> cmdide0 at pci0 dev 12 function 0: Silicon Image 0680 (rev. 0x02)
> cmdide0: primary channel wired to native-PCI mode
> cmdide0: using irq 17 for native-PCI interrupt
> atabus0 at cmdide0 channel 0
> cmdide0: secondary channel wired to native-PCI mode
> atabus1 at cmdide0 channel 1
> ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
> ohci0: interrupting at irq 19
> ohci0: OHCI version 1.0
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
> ohci1: interrupting at irq 19
> ohci1: OHCI version 1.0
> usb1 at ohci1: USB revision 1.0
> ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
> ehci0: interrupting at irq 19
> ehci0: companion controllers, 3 ports each: ohci0 ohci1
> usb2 at ehci0: USB revision 2.0
> biomask 8000038 netmask 8000038 ttymask 8000038
> uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1 at usb1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2 at usb2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> wd0 at atabus0 drive 0: <HDS728080PLAT20>
> wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
> boot device: tlp0
> root on tlp0
> nfs_boot: trying BOOTP
> nfs_boot: BOOTP next-server: 192.168.24.24
> nfs_boot: my_addr=192.168.24.66
> nfs_boot: my_mask=255.255.255.0
> nfs_boot: gateway=192.168.24.1
> root on 192.168.24.24:/store/exports/nas
> root file system type: nfs
> Sun May 30 07:04:12 JST 2010
> Starting file system checks:
> Setting tty flags.
> Setting sysctl variables:
> kern.no_sa_support: 1 -> 1
> ddb.onpanic: 1 -> 0
> Hostname: nas8245
> IPv6 mode: host
> Configuring network interfaces:.
> Adding interface aliases:.
> add net default: gateway 192.168.24.1
> Building databases: dev, utmp, utmpx done
> Starting syslogd.
> Checking for core dump...
> savecore: no core dump (no dumpdev)
> Mounting all filesystems...
> Clearing temporary files.
> Checking quotas: done.
> Setting securelevel: kern.securelevel: 0 -> 1
> Starting virecover.
> Starting local daemons:.
> Updating motd.
> Starting inetd.
> Starting cron.
> Sun May 30 07:04:20 JST 2010
> 
> NetBSD/sandpoint (nas8245) (tty00)
> 
> login: satmgr0: power button pressed, shutting down!
> syncing disks... done
> unmounting file systems... done
> 
> ---
>