Re: NetBSD 10.0 partitioning issues and sysinst segfaults
Riccardo Mottola <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.sparc |
|---|---|
| Message-ID | <[email protected]> |
Hi, still wondering why I can't boot my cdrom... it would make me a little more confindent than relying on the swap partition I can no longer touch... Riccardo Mottola wrote: > I give partition ok... but then see this: > > > 116888C6714B1825E56406C96C06B1D3FinishedCommand ended on signal > E56406C96C06B1D3Finisheddisklabel -w -r -f /tmp/disklabel.106 sd0 > 'sd' 'fict > ious' > Hit enter to continue I had the idea that sysinst or disklabel are confused by the existing partition. I thought of running dd: *|dd if=/dev/zero of=/dev/rsd0c bs=8k count=1 As mentioned here: https://www.netbsd.org/docs/guide/en/chap-misc.html but then the partition menu still sees all partitions? why? I then used the menu option to use the standard whole disk, which just makes one big root (not useful, as a test) I end up with [1] Bus error /sysinst I tried zeroing out more: # dd if=/dev/zero of=/dev/rsd0c bs=8k count=10 10+0 records in 10+0 records out 81920 bytes transferred in 0.030 secs (2730666 bytes/sec) Riccardo |*