Re: SS20 up and running with 10.0
Riccardo Mottola <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.sparc |
|---|---|
| Message-ID | <[email protected]> |
Hi There, Michael wrote: > Seems stale so far, been updating kernel and userland with no issues. > Will torture it a bit more once that's all done. Since I did some work to find a suitable replacement disk, I also took the time to swap the two CPU modules SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95) CPU_#0 HyperSPARC ROSS RT620/RT625 0x00040000 Bytes ECache CPU_#2 HyperSPARC ROSS RT620/RT625 0x00040000 Bytes ECache No change in POST.... I did torture it a little in single-processor mode, so that I could run on "the other" CPU. No issues. Then I rebooted MP and this time instead of "Watchdog reset" I see the serial console flooded with: <...> [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<VME=0,SBUS=0,E,T,ME> [ 1355.2262745] SX STATUS: 00005400 [ 1355.2262745] SX ERROR : 00000000 [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<VME=0,SBUS=0,E,T,ME> [ 1355.2262745] SX STATUS: 00005400 [ 1355.2262745] SX ERROR : 00000000 [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<VME=0,SBUS=0,E,T,ME> [ 1355.2262745] SX STATUS: 00005400 [ 1355.2262745] SX ERROR : 00000000 [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<VME=0,SBUS=0,E,T,ME> [ 1355.2262745] SX STATUS: 00005400 [ 1355.2262745] SX ERROR : 00000000 [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<VME=0,SBUS=0,E,T,ME> [ 1355.2262745] SX STATUS: 00005400 [ 1355.2262745] SX ERROR : 00000000 [ 1355.2262745] SX DIAG : 00004804 [ 1355.2262745] Async registers (mid 8): afsr=0<AFA=0>; afva=0x00 [ 1355.2262745] nmi_hard: SMP botch. [ 1355.2262745] cpu0: NMI: system interrupts: 0x40090000<V <...> I hope this is super-meaningful for you! Riccardo