Re: Removing the video card from the ss 10.

I also use a (semi-) sacrificial chip puller like this:

https://www.ifixit.com/products/ic-extractor-connector-puller

Sacrificial because you are going to be bending it wider than intended of
course...

It lets you get the card near the SBUS connector and helps give you
consistent upwards pull.  My ss10/20 (with the latches of course) are
pretty cramped and getting fingers in between cards (assuming multiple
SBUS/MBUS card) isn't really gonna happen.

On Wed, Sep 3, 2025 at 8:33 PM <[email protected]> wrote:

> More than a decade since I changed the card in the ss 2 and don't want
> to break brittle old parts.
>
> Push the ivory colored nylon latch at each of two corners back to
> release? Lift the corners to disconnect the connector?
>
> Thanks for any tips,         ... P.
>
>
>
> --
> mobile:  +1 778 951 5147 <= still working
> VoIP:    +1 778 508 0020 <= new & working
> VoIP:    +1 604 xxx 0140 <= defunct
> projects: en.wikibooks.org/wiki/User:PeterEasthope
>
>