Re: SunFire v240 hardware question

Greg Earle writes:
> We have a couple of V240s afflicted with this ailment.
[...]
>   The sparcv9 processor operates at 1002 MHz,
[...]
>  mb_p0_t_core (temperature-sensor, ad00000ad1)
>  :Temperature	 51 
>  :name	 mb_p0_t_core 
>  mb_p1_t_core (temperature-sensor, ad00000ad9)
>  :Temperature	 51 
>  :name	 mb_p1_t_core 
[..] 
> which actually isn't too bad.

Indeed.

>   The sparcv9 processor operates at 1503 MHz,
[...]
> mb_p0_t_core (temperature-sensor, 40ee00000b0b)
>  :Temperature	 81 
>  :name	 mb_p0_t_core 
>  mb_p1_t_core (temperature-sensor, 40ee00000b13)
>  :Temperature	 69 
>  :name	 mb_p1_t_core 
>  mb_t_enc (temperature-sensor, 40ee00000b1b)
>  :Temperature	 27 
>  :name	 mb_t_enc 
> 
> which as you can see is quite a bit higher.  Obviously the higher
> base value is due to the higher CPU speed, presumably.  

Agreed.  IMHO 81°C is definitely too much for sustained operation.
Of course ambient temp and other factors will influence stability,
and Chris (the OP) might be lucky. :-)

> But we
> have no idea why the P0 temperature is so much higher than the P1.

That's because P1 is close to the chassis fans that sit between the
disk cage and the board, while P0 is further away, near the rear of
the system.


Regards -- Volker
-- 
------------------------------------------------------------------------
Volker A. Brandt               Consulting and Support for Oracle Solaris
Brandt & Brandt Computer GmbH                   WWW: http://www.bb-c.de/
Am Wiesenpfad 6, 53340 Meckenheim, GERMANY            Email: [email protected]
Handelsregister: Amtsgericht Bonn, HRB 10513              Schuhgröße: 46
Geschäftsführer: Rainer J.H. Brandt und Volker A. Brandt

"When logic and proportion have fallen sloppy dead"