Re: bge fail on netboot of NetBSD-6 on v215 and v240

Hi,

> bge0 at pci0 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
> bge0: interrupting at ivec 37c8
> data error type 32 sfsr=808008 sfva=e0023040 afsr=10080005000000 afva=7f6000010$
> data fault: pc=13fe2d0 addr=e0023040 sfsr=0x808008<ASI=0x80,W>
> kernel trap 32: data access error
> 
> (gdb) list *(bge_attach+0x784)
> 0x11a51a4 is in bge_attach (../../../../dev/pci/if_bge.c:3612).
> 3607             * Read the hardware config word in the first 32k of NIC internal
> 3608             * memory, or fall back to the config word in the EEPROM.
> 3609             * Note: on some BCM5700 cards, this value appears to be unset.
> 3610             */

Is this related to things like:

  isp0: invalid NVRAM header

where the built-in sparc64 hardware doesn't include the ROM/NVRAM normally
associated with some chipsets?  As there is nothing mapped at that location,
we get the data fault?  I wonder if that is also the case where this value
appears to be unset, but that hardware is more forgiving.

Thanks,

J

-- 
   NetBSD: simple; works; documented    /        Sailing at Newbiggin
        http://www.netbsd.org/        /   http://www.newbigginsailingclub.org/