Re: Ultrasparc III+ kernel panic

Julian Coleman a écrit :
> Hi,
>
> Is it possible to swap the graphics cards in these two?
>
>> First server (stable) :
>> - 2 * USIII/750
>> - XVR-500 (no screen, no keyboard)
>>
>> Second server (unstable) :
>> - 2 * USIII+/900
>> - Creator-3D (text console)
>
> The reason that I ask is that I'm seeing a number of "SIR Reset"'s happening
> on my U60, and it's a lot worse with 2 CPU's installed, or with a Creator-3D
> as the console.  With 1 CPU, I haven't seen one, and with serial console,
> they happen less frequently.  I haven't been able to match the resets to
> system load - they are more likely when the machine is busy (e.g. running
> /etc/daily), but can also happen when it's idle.  On the other hand, with 2
> CPU's and a serial console, it managed 10 days of continuous pkgsrc building
> before resetting.
>
> I'm not sure if this is related (different hardware) or not.  However, as
> the problem is worse on the U60 with the C-3D as console, there might be
> something related to UPA.
>
> For comparison, I have an SB2000 with:
>
>    501-6230 system board
>    2 * 501-6485 1200MHz US III Cu
>    501-4788 Creator-3D (console)
>    375-3181 XVR-100
>    2 * Fujitsu MAW3300FC in RAID 1
>
> as my desktop, and this is stable.

	Julian,

	I have made some tests. First server (XVR500, 2*US-III/750) remains in 
same configuration and is stable.

	I don't understand why I cannot put a XVR500 in second one. System 
starts but screen was unusable (display takes a bad resolution and was 
scrambled). In a first time, I thought my second XVR500 was dying. But I 
have a third Blade 2000 in the same place and this XVR500 runs fine in 
third Blade 2000... Why ? I don't know. And all PCI slot run fine in 
server where XVR500 doesn't work...

	Thus, I have swapped both servers. I have tested third one with Creator 
3D (new creator3D, new memory, one new CPU, one retired from second 
server...) and it hangs like second one. The last night, I have 
installed XVR500 and removed Creator 3D). Now, server is stable enough 
to build NetBSD from sources and pkgsrc :

load averages:  7.36,  7.20,  7.02;   up 0+11:33:42        11:54:04
145 processes: 5 runnable, 137 sleeping, 1 zombie, 2 on CPU
CPU states: 79.4% user, 0.0% nice, 20.6% system, 0.0% int, 0.0% idle
Memory: 1078M Act, 543M In, 9192K Wired, 71M Exec, 1264M File, 42M Free
Swap: 8050M Total, 143M Used, 7907M Free

	I suspect a bug somewhere in UPA support as you said.

	Best regards,

	JKB