Re: issue XFCE4

On Sun, Nov 15, 2015 at 11:04:51PM +0100, phipo wrote:
> [   226.473] (II) RADEON(0): TOTO SAYS 0000000000100000
> [   226.473] (II) RADEON(0): MMIO registers at 0x0000000000100000: size 64KB
> [   226.474] (EE) RADEON(0): Unable to map MMIO aperture. Invalid 
> argument (22)
> [   226.474] (EE) RADEON(0): Memory map the MMIO region failed
> [   226.474] (II) UnloadModule: "radeon"
> [   226.474] (II) Unloading radeon

This is where it goes wrong.

My xvr100 machine says:

[    31.970] (II) RADEON(0): TOTO SAYS 0000000000100000
[    31.970] (II) RADEON(0): MMIO registers at 0x0000000000100000: size 64KB
[    31.970] (II) RADEON(0): PCI bus 0 card 2 func 0
[    31.988] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    31.988] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    31.988] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    31.988] (==) RADEON(0): Default visual is TrueColor

Can you show the part of /var/run/dmesg where it talks about radeonfb0?

Mine says:

schizo3:  pci4 at schizo3
pci4: i/o space, memory space enabled
radeonfb0 at pci4 dev 2 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
no data for est. mode 640x480x67
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1280x1024 60Hz
radeonfb0: port 1: physical 1280x1024 75Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)


Michael, any ideas on this one?

Martin