Xorg on Blade 150
Jerome Ibanes <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.sparc64 |
|---|---|
| Message-ID | <CAB+41mFhiP_YRkJeNFdAUnfFvkCG=TkAhOBX7DffXv8D7VbL9g@mail.gmail.com> |
List,
Installed 7.0.1 on a sun blade 150, 4GB ram 4GB disk.
"unable to map mmio aperture" seems to prevent Xorg from starting, as such:
X.Org X Server 1.10.6
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: NetBSD/sparc64 -
Current Operating System: NetBSD sea-cpu-011.drawterm.com 7.0.1 NetBSD
7.0.1 (GENERIC.201605221355Z) sparc64
Build Date: 01 August 2011 01:01:00AM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 31 16:12:08 2067
(EE) listPossibleVideoDrivers: trying /dev/fb0
(EE) listPossibleVideoDrivers: trying /dev/fb1
(EE) listPossibleVideoDrivers: trying /dev/fb2
(EE) listPossibleVideoDrivers: trying /dev/fb3
(EE) listPossibleVideoDrivers: trying /dev/fb4
(EE) listPossibleVideoDrivers: trying /dev/fb5
(EE) listPossibleVideoDrivers: trying /dev/fb6
(EE) listPossibleVideoDrivers: trying /dev/fb7
(EE) listPossibleVideoDrivers: trying /dev/fb8
(EE) listPossibleVideoDrivers: trying /dev/fb9
(==) Using default built-in configuration (12 lines)
(EE) Unable to map mmio aperture. Invalid argument (22)
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
sea-cpu-011$ ls -l /dev/fb*
lrwx------ 1 root wheel 3 Dec 31 16:04 /dev/fb -> fb0
crw-rw-rw- 1 root wheel 22, 0 Dec 31 16:04 /dev/fb0
crw-rw-rw- 1 root wheel 22, 1 Dec 31 16:04 /dev/fb1
/var/log/Xorg.0.log as follows:
[ 734.061]
X.Org X Server 1.10.6
Release Date: 2011-07-08
[ 734.063] X Protocol Version 11, Revision 0
[ 734.063] Build Operating System: NetBSD/sparc64 -
[ 734.064] Current Operating System: NetBSD sea-cpu-011.drawterm.com
7.0.1 NetBSD 7.0.1 (GENERIC.201605221355Z) sparc64
[ 734.067] Build Date: 01 August 2011 01:01:00AM
[ 734.067]
[ 734.067] Current version of pixman: 0.32.6
[ 734.068] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 734.068] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 734.072] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 31
16:12:08 2067
[ 734.073] (II) Loader magic: 0x45f4a0
[ 734.073] (II) Module ABI versions:
[ 734.073] X.Org ANSI C Emulation: 0.4
[ 734.073] X.Org Video Driver: 10.0
[ 734.073] X.Org XInput driver : 12.2
[ 734.073] X.Org Server Extension : 5.0
[ 734.845] (--) PCI:*(0:0:19:0) 1002:4752:0000:0000 rev 39, Mem @
0x03000000/16777216, 0x00426000/4096, I/O @ 0x00000b00/256, BIOS @
0x????????/131072
[ 734.887] (EE) listPossibleVideoDrivers: trying /dev/fb0
[ 734.887] (EE) listPossibleVideoDrivers: trying /dev/fb1
[ 734.888] (EE) listPossibleVideoDrivers: trying /dev/fb2
[ 734.888] (EE) listPossibleVideoDrivers: trying /dev/fb3
[ 734.888] (EE) listPossibleVideoDrivers: trying /dev/fb4
[ 734.889] (EE) listPossibleVideoDrivers: trying /dev/fb5
[ 734.889] (EE) listPossibleVideoDrivers: trying /dev/fb6
[ 734.890] (EE) listPossibleVideoDrivers: trying /dev/fb7
[ 734.890] (EE) listPossibleVideoDrivers: trying /dev/fb8
[ 734.890] (EE) listPossibleVideoDrivers: trying /dev/fb9
[ 734.891] (==) Using default built-in configuration (12 lines)
[ 734.891] (==) --- Start of built-in configuration ---
[ 734.891] Section "Device"
[ 734.891] Identifier "Builtin Default ati Device 0"
[ 734.891] Driver "ati"
[ 734.891] EndSection
[ 734.892] Section "Screen"
[ 734.892] Identifier "Builtin Default ati Screen 0"
[ 734.892] Device "Builtin Default ati Device 0"
[ 734.892] EndSection
[ 734.892] Section "ServerLayout"
[ 734.892] Identifier "Builtin Default Layout"
[ 734.892] Screen "Builtin Default ati Screen 0"
[ 734.892] EndSection
[ 734.892] (==) --- End of built-in configuration ---
[ 734.892] (==) ServerLayout "Builtin Default Layout"
[ 734.892] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[ 734.892] (**) | |-->Monitor "<default monitor>"
[ 734.894] (**) | |-->Device "Builtin Default ati Device 0"
[ 734.894] (==) No monitor specified for screen "Builtin Default ati
Screen 0".
Using a default monitor configuration.
[ 734.894] (==) Not automatically adding devices
[ 734.894] (==) Not automatically enabling devices
[ 734.895] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 734.895] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 734.895] (==) |-->Input Device "<default pointer>"
[ 734.895] (==) |-->Input Device "<default keyboard>"
[ 734.895] (==) The core pointer device wasn't specified explicitly
in the layout.
Using the default mouse configuration.
[ 734.895] (==) The core keyboard device wasn't specified explicitly
in the layout.
Using the default keyboard configuration.
[ 734.895] (II) LoadModule: "extmod"
[ 734.899] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 734.901] (II) Module extmod: vendor="X.Org Foundation"
[ 734.901] compiled for 1.10.6, module version = 1.0.0
[ 734.901] Module class: X.Org Server Extension
[ 734.901] ABI class: X.Org Server Extension, version 5.0
[ 734.901] (II) Loading extension MIT-SCREEN-SAVER
[ 734.901] (II) Loading extension XFree86-VidModeExtension
[ 734.901] (II) Loading extension XFree86-DGA
[ 734.901] (II) Loading extension DPMS
[ 734.901] (II) Loading extension XVideo
[ 734.902] (II) Loading extension XVideo-MotionCompensation
[ 734.902] (II) Loading extension X-Resource
[ 734.902] (II) LoadModule: "dbe"
[ 734.904] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 734.905] (II) Module dbe: vendor="X.Org Foundation"
[ 734.905] compiled for 1.10.6, module version = 1.0.0
[ 734.905] Module class: X.Org Server Extension
[ 734.905] ABI class: X.Org Server Extension, version 5.0
[ 734.906] (II) Loading extension DOUBLE-BUFFER
[ 734.906] (II) LoadModule: "glx"
[ 734.909] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 734.910] (II) Module glx: vendor="X.Org Foundation"
[ 734.910] compiled for 1.10.6, module version = 1.0.0
[ 734.910] ABI class: X.Org Server Extension, version 5.0
[ 734.911] (==) AIGLX enabled
[ 734.911] (II) Loading extension GLX
[ 734.911] (II) LoadModule: "record"
[ 734.914] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 734.915] (II) Module record: vendor="X.Org Foundation"
[ 734.915] compiled for 1.10.6, module version = 1.13.0
[ 734.915] Module class: X.Org Server Extension
[ 734.915] ABI class: X.Org Server Extension, version 5.0
[ 734.915] (II) Loading extension RECORD
[ 734.915] (II) LoadModule: "dri"
[ 734.918] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 734.919] (II) Module dri: vendor="X.Org Foundation"
[ 734.919] compiled for 1.10.6, module version = 1.0.0
[ 734.919] ABI class: X.Org Server Extension, version 5.0
[ 734.919] (II) Loading extension XFree86-DRI
[ 734.919] (II) LoadModule: "dri2"
[ 734.922] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 734.922] (II) Module dri2: vendor="X.Org Foundation"
[ 734.922] compiled for 1.10.6, module version = 1.2.0
[ 734.923] ABI class: X.Org Server Extension, version 5.0
[ 734.923] (II) Loading extension DRI2
[ 734.923] (II) LoadModule: "ati"
[ 734.924] (II) Loading /usr/X11R7/lib/modules/drivers/ati_drv.so
[ 734.925] (II) Module ati: vendor="X.Org Foundation"
[ 734.925] compiled for 1.10.6, module version = 6.14.6
[ 734.925] Module class: X.Org Video Driver
[ 734.925] ABI class: X.Org Video Driver, version 10.0
[ 734.925] (II) LoadModule: "mach64"
[ 734.926] (II) Loading /usr/X11R7/lib/modules/drivers/mach64_drv.so
[ 734.928] (II) Module mach64: vendor="X.Org Foundation"
[ 734.929] compiled for 1.10.6, module version = 6.9.4
[ 734.929] Module class: X.Org Video Driver
[ 734.929] ABI class: X.Org Video Driver, version 10.0
[ 734.929] (II) LoadModule: "mouse"
[ 734.930] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 734.931] (II) Module mouse: vendor="X.Org Foundation"
[ 734.931] compiled for 1.10.6, module version = 1.9.0
[ 734.931] Module class: X.Org XInput Driver
[ 734.931] ABI class: X.Org XInput driver, version 12.2
[ 734.932] (II) LoadModule: "kbd"
[ 734.933] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 734.934] (II) Module kbd: vendor="X.Org Foundation"
[ 734.934] compiled for 1.10.6, module version = 1.8.0
[ 734.934] Module class: X.Org XInput Driver
[ 734.934] ABI class: X.Org XInput driver, version 12.2
[ 734.934] (II) MACH64: Driver for ATI Mach64 chipsets
[ 734.934] (--) Using wscons driver on /dev/ttyE1 in pcvt
compatibility mode (version 3.32)
[ 734.934] (--) using VT number 2
[ 734.943] (II) Loading /usr/X11R7/lib/modules/drivers/mach64_drv.so
[ 734.943] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 734.944] (II) MACH64(0): Creating default Display subsection in
Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[ 734.944] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 734.944] (==) MACH64(0): Using XAA acceleration architecture
[ 734.945] (EE) Unable to map mmio aperture. Invalid argument (22)
[ 734.946] (WW) MACH64: Mach64 in slot 0:19:0 could not be detected!
[ 734.946] (II) UnloadModule: "mach64"
[ 734.946] (II) Unloading mach64
[ 734.946] (EE) Screen(s) found, but none have a usable configuration.
[ 734.947]
Fatal server error:
[ 734.947] no screens found
[ 734.948]
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
[ 734.948] Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[ 734.949]
kernel messages:
machfb0: preposterous dot clock (0)
The same machine also has openbsd 5.9 installed and I can run Xorg
there; and what follows is Xorg.0.log under openbsd 5.9:
[ 86.570] (--) Using wscons driver
[ 86.648]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 86.649] X Protocol Version 11, Revision 0
[ 86.649] Build Operating System: OpenBSD 5.9 sparc64
[ 86.649] Current Operating System: OpenBSD
sea-cpu-011.drawterm.com 5.9 JIBANES#0 sparc64
[ 86.656] Build Date: 14 April 2016 07:40:03PM
[ 86.656]
[ 86.658] Current version of pixman: 0.32.8
[ 86.658] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 86.658] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 86.660] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 10
07:13:33 2016
[ 86.740] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 86.751] (==) No Layout section. Using the first Screen section.
[ 86.751] (==) No screen section available. Using defaults.
[ 86.751] (**) |-->Screen "Default Screen Section" (0)
[ 86.751] (**) | |-->Monitor "<default monitor>"
[ 86.761] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 86.762] (==) Disabling SIGIO handlers for input devices
[ 86.762] (==) Automatically adding devices
[ 86.762] (==) Automatically enabling devices
[ 86.762] (==) Not automatically adding GPU devices
[ 86.962] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 86.962] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 86.962] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 86.965] (II) Loader magic: 0xd17b2856f8
[ 86.965] (II) Module ABI versions:
[ 86.965] X.Org ANSI C Emulation: 0.4
[ 86.965] X.Org Video Driver: 19.0
[ 86.965] X.Org XInput driver : 21.0
[ 86.966] X.Org Server Extension : 9.0
[ 86.994] (--) PCI:*(0:0:19:0) 1002:4752:0000:0000 rev 39, Mem @
0x03000000/16777216, 0x00426000/4096, I/O @ 0x00000b00/256, BIOS @
0x????????/131072
[ 86.998] (II) LoadModule: "glx"
[ 87.060] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 87.426] (II) Module glx: vendor="X.Org Foundation"
[ 87.426] compiled for 1.17.4, module version = 1.0.0
[ 87.426] ABI class: X.Org Server Extension, version 9.0
[ 87.427] (==) AIGLX enabled
[ 87.430] (==) Matched ati as autoconfigured driver 0
[ 87.430] (==) Assigned the driver to the xf86ConfigLayout
[ 87.430] (II) LoadModule: "ati"
[ 87.436] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[ 87.447] (II) Module ati: vendor="X.Org Foundation"
[ 87.447] compiled for 1.17.4, module version = 7.5.0
[ 87.447] Module class: X.Org Video Driver
[ 87.447] ABI class: X.Org Video Driver, version 19.0
[ 87.448] (II) LoadModule: "mach64"
[ 87.453] (II) Loading /usr/X11R6/lib/modules/drivers/mach64_drv.so
[ 87.478] (II) Module mach64: vendor="X.Org Foundation"
[ 87.478] compiled for 1.17.4, module version = 6.9.5
[ 87.478] Module class: X.Org Video Driver
[ 87.478] ABI class: X.Org Video Driver, version 19.0
[ 87.481] (II) MACH64: Driver for ATI Mach64 chipsets
[ 87.486] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 87.488] (II) MACH64(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 87.488] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 87.489] (==) MACH64(0): Using XAA acceleration architecture
[ 87.490] (II) MACH64: Mach64 in slot 0:19:0 detected.
[ 87.492] (II) MACH64(0): BIOS Data: BIOSSize=0x0000, ROMTable=0x0000.
[ 87.492] (II) MACH64(0): BIOS Data: ClockTable=0x0000,
FrequencyTable=0x0000.
[ 87.492] (II) MACH64(0): BIOS Data: LCDTable=0x0000.
[ 87.492] (II) MACH64(0): BIOS Data: VideoTable=0x0000,
HardwareTable=0x0000.
[ 87.493] (II) MACH64(0): BIOS Data: I2CType=0x00, Tuner=0x00,
Decoder=0x00, Audio=0x0F.
[ 87.494] (--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
[ 87.494] (--) MACH64(0): Chip type 4752 "GR", version 7, foundry
TSMC, class 0, revision 0x00.
[ 87.494] (--) MACH64(0): PCI bus interface detected.
[ 87.494] (--) MACH64(0): ATI Mach64 adapter detected.
[ 87.494] (!!) MACH64(0): For information on using the multimedia
capabilities
of this adapter, please see http://gatos.sf.net.
[ 87.494] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
[ 87.494] (==) MACH64(0): RGB weight 888
[ 87.494] (==) MACH64(0): Default visual is TrueColor
[ 87.495] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
[ 87.495] (II) MACH64(0): Using Mach64 accelerator CRTC.
[ 87.495] (II) MACH64(0): Storing hardware cursor image at 0x037FFC00.
[ 87.495] (II) MACH64(0): Using 8 MB linear aperture at 0x03800000.
[ 87.495] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
[ 87.495] (II) MACH64(0): Using Block 0 MMIO aperture at 0x00426400.
[ 87.495] (II) MACH64(0): Using Block 1 MMIO aperture at 0x00426000.
[ 87.496] (II) MACH64(0): MMIO write caching enabled.
[ 87.496] (--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
[ 87.496] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
[ 87.496] (II) MACH64(0): Engine XCLK 115.000 MHz; Refresh rate code 10.
[ 87.496] (--) MACH64(0): Internal programmable clock generator detected.
[ 87.496] (--) MACH64(0): Reference clock 29.500 MHz.
[ 87.498] (II) MACH64(0): <default monitor>: Using default hsync
range of 31.50-48.00 kHz
[ 87.498] (II) MACH64(0): <default monitor>: Using default vrefresh
range of 50.00-70.00 Hz
[ 87.498] (II) MACH64(0): <default monitor>: Using default maximum
pixel clock of 65.00 MHz
[ 87.498] (WW) MACH64(0): Unable to estimate virtual size
[ 87.499] (II) MACH64(0): Maximum clock: 230.00 MHz
[ 87.499] (II) MACH64(0): Not using default mode "640x350"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "320x175"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "640x400"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "320x200"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "720x400"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "360x200"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "640x480"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "320x240"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "640x480"
(vrefresh out of range)
[ 87.499] (II) MACH64(0): Not using default mode "320x240"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "640x480"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "320x240"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "800x600"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "400x300"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "800x600"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "400x300"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.500] (II) MACH64(0): Not using default mode "400x300" (hsync
out of range)
[ 87.500] (II) MACH64(0): Not using default mode "1024x768i"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "512x384i"
(vrefresh out of range)
[ 87.500] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.500] (II) MACH64(0): Not using default mode "512x384" (hsync
out of range)
[ 87.500] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.500] (II) MACH64(0): Not using default mode "512x384" (hsync
out of range)
[ 87.502] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.502] (II) MACH64(0): Not using default mode "512x384" (hsync
out of range)
[ 87.502] (II) MACH64(0): Not using default mode "1152x864" (hsync
out of range)
[ 87.502] (II) MACH64(0): Not using default mode "576x432" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1280x960" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "640x480" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1280x960" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "640x480" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1280x1024" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "640x512" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1280x1024" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "640x512" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1280x1024" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "640x512" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1600x1200" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1600x1200" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1600x1200" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1600x1200" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "1600x1200" (hsync
out of range)
[ 87.503] (II) MACH64(0): Not using default mode "800x600" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "896x672" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "896x672" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "928x696" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "928x696" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "960x720" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 87.504] (II) MACH64(0): Not using default mode "960x720" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "832x624" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "416x312" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1400x1050" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "700x525" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1400x1050" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "700x525" (hsync
out of range)
[ 87.504] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 87.505] (II) MACH64(0): Not using default mode "960x720" (hsync
out of range)
[ 87.505] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 87.505] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.505] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 87.505] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.505] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 87.505] (II) MACH64(0): Not using default mode "1024x768" (hsync
out of range)
[ 87.505] (--) MACH64(0): Virtual size is 1024x768 (pitch 1024)
[ 87.505] (**) MACH64(0): *Default mode "1024x768": 65.0 MHz, 48.4
kHz, 60.0 Hz
[ 87.505] (II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 87.505] (**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9
kHz, 60.3 Hz
[ 87.506] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2
kHz, 56.2 Hz
[ 87.506] (II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5
kHz, 59.9 Hz
[ 87.506] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4
kHz, 60.0 Hz (D)
[ 87.506] (II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524
592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9
kHz, 60.3 Hz (D)
[ 87.506] (II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420
484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2
kHz, 56.3 Hz (D)
[ 87.506] (II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412
448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 87.506] (**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5
kHz, 60.1 Hz (D)
[ 87.506] (II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328
376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 87.506] (==) MACH64(0): DPI set to (96, 96)
[ 87.507] (II) Loading sub module "fb"
[ 87.507] (II) LoadModule: "fb"
[ 87.558] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 87.577] (II) Module fb: vendor="X.Org Foundation"
[ 87.577] compiled for 1.17.4, module version = 1.0.0
[ 87.577] ABI class: X.Org ANSI C Emulation, version 0.4
[ 87.577] (II) Loading sub module "ramdac"
[ 87.577] (II) LoadModule: "ramdac"
[ 87.577] (II) Module "ramdac" already built-in
[ 87.580] (II) Loading sub module "i2c"
[ 87.580] (II) LoadModule: "i2c"
[ 87.580] (II) Module "i2c" already built-in
[ 87.596] (II) MACH64(0): I2C bus "Mach64" initialized.
[ 87.597] (--) Depth 24 pixmap format is 32 bpp
[ 87.617] (II) MACH64(0): [drm] SAREA 2200+1208: 3408
[ 87.633] drmOpenDevice: node name is /dev/drm0
[ 87.635] drmOpenDevice: open result is -1, (Device not configured)
[ 87.636] drmOpenDevice: node name is /dev/drm0
[ 87.636] drmOpenDevice: open result is -1, (Device not configured)
[ 87.636] [drm] failed to load kernel module "mach64"
[ 87.636] (EE) [drm] drmOpen failed.
[ 87.637] (EE) MACH64(0): [dri] DRIScreenInit Failed
[ 87.694] (==) MACH64(0): Backing store enabled
[ 87.721] (==) MACH64(0): Silken mouse disabled
[ 87.742] (==) MACH64(0): DPMS enabled
[ 87.748] (II) MACH64(0): Direct rendering disabled
[ 87.756] (==) RandR enabled
[ 87.925] (II) AIGLX: Screen 0 is not DRI2 capable
[ 87.925] (EE) AIGLX: reverting to software rendering
[ 88.690] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 88.698] (II) AIGLX: Loaded and initialized swrast
[ 88.698] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 90.951] (II) config/wscons: checking input device /dev/wskbd
[ 90.951] (II) wskbd: using layout us
[ 90.952] (II) LoadModule: "kbd"
[ 90.975] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 90.999] (II) Module kbd: vendor="X.Org Foundation"
[ 90.999] compiled for 1.17.4, module version = 1.8.1
[ 90.999] Module class: X.Org XInput Driver
[ 91.001] ABI class: X.Org XInput driver, version 21.0
[ 91.002] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 91.002] (**) /dev/wskbd: always reports core events
[ 91.002] (**) /dev/wskbd: always reports core events
[ 91.003] (**) Option "Protocol" "standard"
[ 91.003] (**) Option "XkbRules" "base"
[ 91.003] (**) Option "XkbModel" "pc105"
[ 91.003] (**) Option "XkbLayout" "us"
[ 91.004] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[ 91.040] (II) config/wscons: checking input device /dev/wsmouse
[ 91.040] (II) LoadModule: "ws"
[ 91.051] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 91.077] (II) Module ws: vendor="X.Org Foundation"
[ 91.077] compiled for 1.17.4, module version = 1.3.0
[ 91.077] Module class: X.Org XInput Driver
[ 91.077] ABI class: X.Org XInput driver, version 21.0
[ 91.077] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 91.078] (**) /dev/wsmouse: always reports core events
[ 91.078] (II) ws: /dev/wsmouse: debuglevel 0
[ 91.078] (**) Option "Device" "/dev/wsmouse"
[ 91.078] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 91.078] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 91.079] (**) ws: /dev/wsmouse: associated screen: 0
[ 91.080] (II) ws: /dev/wsmouse: minimum x position: 0
[ 91.080] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 91.080] (II) ws: /dev/wsmouse: minimum y position: 0
[ 91.080] (II) ws: /dev/wsmouse: maximum y position: 767
[ 91.080] (==) ws: /dev/wsmouse: Buttons: 7
[ 91.080] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 91.080] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 91.109] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 91.110] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 91.110] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 91.110] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 99.962] (II) UnloadModule: "ws"
[ 99.963] (II) UnloadModule: "kbd"
[ 100.099] (II) Server terminated successfully (0). Closing log file.
The issue seems close to bug xsrc/50429, except that I don't use nfsroot.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=50429
Is there a known working workaround on 7.0.1?
J.