Re: NetBSD installation woes on Sun Blade 100

John Klos <[email protected]>
Newsgroups gmane.os.netbsd.ports.sparc64
Message-ID <[email protected]> 
> So i would be needing the kernel sources that John used for his posted
> testing iso.
>
> I used the kernel syssrc.tgz from here:
> ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-9.0/source/sets/
>
> Kernels compiled with this source will not work with the mach64.

I used netbsd-9 from the day that I made the kernel. 9.0 is from February. 
If my kernel worked, then just getting netbsd-9 and updating SSIZE should 
work. Or, like Martin suggests, try -current :)

John
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.