Re: Clock Error

Ken Wellsch <[email protected]>
Newsgroups gmane.os.netbsd.ports.vax
Message-ID <[email protected]>
I am sure this is nothing useful, but FWIW, when I did take a copy of
the disk image running under SIMH and booted that on a real 4000/60, to
determine if a SIMH disk image was really a raw disk image and thus would
boot from a SCSI emulation card, I got an odd time error message beyond the
expected "invalid TOY clock time" error:


 >>> boot dka0

 
-DKA0
>> NetBSD/vax boot [1.12 (Mon Dec 11 14:13:31 UTC 2023)] <<
>> Press any key to abort autoboot 4
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
3547476+184588 [250288+237102]=0x406650
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.99.10 (GENERIC) #1: Mon Dec 11 09:17:31 EST 2023
[   1.0000000]  netbsd@z440d:/home/netbsd/obj/sys/arch/vax/compile/GENERIC
[   1.0000000] VAXstation 4000/60
[   1.0000000] total memory = 73312 KB
[   1.0000000] avail memory = 66272 KB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: KA46, Mariah, 2KB L1 cache, 256KB L2 cache
[   1.0000000] vsbus0 at mainbus0
[   1.0000000] vsbus0: 32K entry DMA SGMAP at PA 0x6e0000 (VA 0x806e0000)
[   1.0000000] vsbus0: interrupt mask 0
[   1.0000000] le0 at vsbus0 csr 0x200e0000 vec 770 ipl 17 maskbit 1 buf 0x0-0xffff
[   1.0000000] le0: address 08:00:2b:3c:ee:a5
[   1.0000000] le0: 32 receive buffers, 8 transmit buffers
[   1.0000000] dz0 at vsbus0 csr 0x200a0000 vec 124 ipl 17 maskbit 4
[   1.0000000] dz0: 4 lines
[   1.0000000] lkkbd0 at dz0
[   1.0000000] lkkbd0: no keyboard
[   1.0000000] wskbd0 at lkkbd0 mux 1
[   1.0000000] lkms0 at dz0
[   1.0000000] wsmouse0 at lkms0 mux 0
[   1.0000000] asc0 at vsbus0 csr 0x200c0080 vec 774 ipl 17 maskbit 0
[   1.0000000] asc0: NCR53C94, 25MHz, SCSI ID 6
[   1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target
[   1.0000000] lcg0 at vsbus0 csr 0x21801000 vec 440 ipl 15 maskbit 2
[   1.0000000] lcg0: framebuffer size 1280x1024, depth 8 (magic 0x90)
[   1.0000000] lcg0: using font QVSS (8x15), console size: 160x68
[   1.0000000] wsdisplay0 at lcg0 kbdmux 1
[   1.0000000] vsaudio0 at vsbus0 csr 0x200d0000 vec 304 ipl 17 maskbit 6
[   1.0000000] audio0 at vsaudio0: playback, capture, full duplex
[   1.0000000] audio0: slinear_le:16 -> mulaw:8 1ch 8000Hz, blk 320 bytes (40ms) for playback
[   1.0000000] audio0: slinear_le:16 <- mulaw:8 1ch 8000Hz, blk 320 bytes (40ms) for recording
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0083270] scsibus0: waiting 2 seconds for devices to settle...
[   1.0279910] WARNING: system needs entropy for security; see entropy(7)
[   1.0481630] WARNING: lwp 28 (system rt_timer) flags 0x20000000: timecounter went backwards from (1 + 0x31719f7f8ca386f3/2^64) sec to (1 + 0x0c7c5260f5e2f5b3/2^64) sec in netbsd:mi_switch+0x4d
[   3.0276380] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.0878110] sd0: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.1081380] sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   6.0073160] swwdog0: software watchdog initialized
[   6.0672220] boot device: sd0
[   6.0880340] root on sd0a dumps on sd0b
[   6.1473720] entropy: best effort
[   6.1778890] /: replaying log to memory
[   6.2070930] root file system type: ffs
[   6.2275890] kern.module.path=/stand/vax/10.99.10/modules
[   6.2375120] WARNING: TOY clock not marked valid
[   6.2475240] WARNING: preposterous TOD clock time
[   6.2578550] WARNING: using filesystem time
[   6.2672830] WARNING: CHECK AND RESET THE DATE!
Tue Dec 19 16:53:37 EST 2023
	...
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.