Re: 10.0_RC5 at boot on VAX 4000/200

It do not find any uda.  Strange.

-- R

Den 2024-03-14 kl. 10:14, skrev Johnny Billquist:
> uba? Where did you get that idea from? uba would be a unibus adapter 
> (might also be used for qbus, can't remember), but it's not a disk, 
> and it can't be your root device.
>
> Based on your 3.1.1 system, root device there was ra1. If you are 
> installing from the CD, that looks like it might have been ra0. Which 
> also looks like the device you gave at the boot prompt (DUA0).
>
>   Johnny
>
> On 2024-03-13 20:48, Robert Doerfler wrote:
>> Hi,
>> after using NetBSD 3.1.1 on this VAX 4000/200, I just thought it 
>> would be about time to do a plain reinstall using some cdrom with 
>> NetBSD 10.0 RC5, but at boot it couldn't "find any uba devices":
>>  >>>init
>>  >>>boot dua0
>>  >> NetBSD/vax boot [1.12 (Tue Feb 27 05:27:39 UTC 2024)] <<
>>  >> Press any key to abort autoboot 0
>> getdisklabel: no disk label
>> nfs_open: must mount first.
>> open netbsd.vax: No such file or directory
>>  > boot netbsd
>> getdisklabel: no disk label
>> nfs_open: must mount first.
>> 3557656+185792 [249504+235927]=0x408b20
>> [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 
>> 2003,
>> [ 1.0000000] 2009, 2010, 2011, 2012, 2013,
>> [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
>> [ 1.0000000] 2024
>> [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
>> [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
>> [ 1.0000000] The Regents of the University of California. All rights 
>> reserved.
>> [ 1.0000000] NetBSD 10.0_RC5 (GENERIC) #0: Tue Feb 27 05:27:39 UTC 2024
>> [ 1.00000/usr/src/sys/arch/vax/compile/GENERIC
>> [ 1.0000000] VAX 4000/200
>> [ 1.0000000] total memory = 40896 KB
>> [ 1.0000000] avail memory = 34952 KB
>> [ 1.0000000] mainbus0 (root)
>> [ 1.0000000] cpu0 at mainbus0: KA660, SOC (ucode rev. 6), 6KB L1 cache
>> [ 1.0000000] ze0 at mainbus0
>> [ 1.0000000] ze0: hardware address 08:00:2b:26:58:fc
>> [ 1.0000000] shac at mainbus0 not configured
>> [ 1.0000000] uba0 at mainbus0: Q22
>> [ 1.0600040] WARNING: system needs entropy for security; see entropy(7)
>> [ 2.1700040] swwdog0: software watchdog initialized
>> [ 2.1800040] boot device: <unknown>
>> [ 2.1900040] root device:
>> [ 2.2300040] use one of: ze0 ddb halt reboot
>> [ 2.2600040] root device: ^G[A^G^H^Huda0
>> [ 2.4200040] use one of: ze0 ddb halt reboot
>> [ 2.4500040] root device: uba0
>> [ 2.4900040] dump device:
>> [ 2.5100040] file system (default generic):
>> [ 2.5300040] can't determine root device
>> [ 2.5400040] root device:
>> Using NetBSD 3.1.1 dmesg has been:
>> NetBSD 3.1.1 (GENERIC) #0: Thu Jul 12 15:39:27 CEST 2007
>> [email protected]:/home/builds/netbsd-3-1-1-RELEASE/sys/arch/vax/compile/GENERIC 
>>
>> VAX 4000/200
>> cpu0: KA660, microcode Rev. 6
>> total memory = 40896 KB
>> avail memory = 36840 KB
>> mainbus0 (root)
>> ibus0 at mainbus0
>> ze0 at ibus0
>> ze0: hardware address 08:00:2b:26:58:fc
>> device shac at ibus0 not configured
>> uba0 at ibus0: Q22
>> uda0 at uba0 csr 172150 vec 774 ipl 17
>> mscpbus0 at uda0: version 6 model 13
>> mscpbus0: DMA burst size set to 4
>> ra0 at mscpbus0 drive 0: RRD40
>> ra1 at mscpbus0 drive 1: RA90
>> Kernelized RAIDframe activated
>> ra0: no disk label: size 871128 sectors
>> ra1: size 2201599 sectors
>> boot device: ra1
>> root on ra1a dumps on ra1b
>> root file system type: ffs
>> TODR stopped - CHECK AND RESET THE DATE.
>> Any advice whats going wrong?
>>
>> Greetings Robert
>>
>>
>> PS: My first mail on [email protected] 
>> <mailto:[email protected]> ;)
>