Re: Kernel issues on MV3100/40
Johnny Billquist <[email protected]>
| Newsgroups | gmane.os.netbsd.ports.vax |
|---|---|
| Organization | SoftJAR AB |
| Message-ID | <[email protected]> |
There is no explicit KA45 detection in the code today, it just matches
in under the KA48 handling.
Feel free to add the bits for this, if you want to. But I suspect there
is nothing more than just a different string being printed in the end,
as I expect the rest is no different from the KA48. But feel free to
correct me if I'm wrong.
Anyway, the basic answer is as easy as mentioned above. :-)
Johnny
On 2024-12-20 22:49, James Robinson wrote:
> Hello,
> I have a MV3100/40 that I am playing with. I have it booting the latest
> trunk of the CVS. When it prints out the model info it is correct but
> the cpu0 in not.
> This is also happening with my NetBSD 9.1 kernel also.
>
> [ 1.0000000] NetBSD 10.99.12 (MV3100) #2: Fri Dec 20 16:10:11 EST 2024
> [ 1.0000000] james@BigTower:/mnt/e/NetBSD/NetBSD/usr/src/obj/sys/arch/
> vax/compile/MV3100
> [ 1.0000000] MicroVAX 3100/m{30,40}
> [ 1.0000000] total memory = 32508 KB
> [ 1.0000000] avail memory = 27124 KB
> [ 1.0000000] mainbus0 (root)
> [ 1.0000000] cpu0 at mainbus0: KA48, SOC, 6KB L1 cache
>
> When I boot the unit is reporting the following information
> >>> show config
>
> KA45-A V1.4-38D-V4.2
> 00-00-F8-51-8A-37
> 32MB
>
> DEVNBR DEVNAM INFO
> ------ -------- --------------------------
> 1 NVR OK
> 3 DZ OK
> 4 CACHE OK
> 5 MEM OK
> 32MB = SY=8MB,S0/1=8MB, S2/3=8MB, S4/5=8MB
> 6 FPU OK
> 7 IT OK
> 8 SYS OK
> 9 NI OK
> 10 SCSI OK
> 0-L0-RZ26F 1-L0-RZ26F 2-L0-RZ26F 6-INITR
>
> Is this a know bug or should I dig a little deeper?
> Thanks,
> Jim
>
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: [email protected] || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol