Re: bsd.rd boots with corrupted memory on Juniper Networks SRX300

Hi Mark,

On Sun, 19 Apr 2026 19:06:36 +0200,
Mark Kettenis <[email protected]> wrote:
> 
> > Date: Sun, 19 Apr 2026 00:15:39 +0200
> > From: Kirill A. Korinsky <[email protected]>
> 
> On arm64, armv7 and riscv64 we avoid the initial console rate reset,
> by not calling comcnattach() in com_fdt_init_cons() and doing some
> minimal initialization ourselves.
> 
> Those platforms also determine the desired rate from the device tree.
> 

I'd like to add that switching the rate via uboot by setenv baudrate 115200
allows to boot the device with standard bsd.rd

So, that diff actually not needed and I ok to withdraw it.

From another hand, official documentation on that device suggested to use
9600 rate see:
https://www.juniper.net/documentation/us/en/hardware/srx300/topics/topic-map/srx300-configuring-junos.html#id-connect-to-the-serial-console-port

And, personally, I think that hardcode 115200 as the only supported rate odd.

-- 
wbr, Kirill