perl is broken in i386 -current

>Synopsis:	perl is broken in i386 -current
>Category:	perl
>Environment:
	System      : OpenBSD 7.9
	Details     : OpenBSD 7.9-current (GENERIC.MP) #427: Sun Jun  7 00:54:31 MDT 2026
			 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP

	Architecture: OpenBSD.i386
	Machine     : i386
>Description:
	Attemtp to use perl in clean i386 VM leads to:
	panic: Unexpectedly didn't find a dot radix character in '0.b41000000' at - line 1.
>How-To-Repeat:
	Like that:

		obsd-i386$ perl 
		use v5.36;
		panic: Unexpectedly didn't find a dot radix character in '0.b41000000' at - line 1.
		obsd-i386$ 

>Fix:

dmesg:
OpenBSD 7.9-current (GENERIC.MP) #427: Sun Jun  7 00:54:31 MDT 2026
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
real mem  = 3220586496 (3071MB)
avail mem = 3143745536 (2998MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/23/99, BIOS32 rev. 0 @ 0xfd283, SMBIOS rev. 2.8 @ 0xf5300 (10 entries)
bios0: vendor SeaBIOS version "rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org" date 04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC HPET WAET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu0: apic clock running at 1000MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu1: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu2 at mainbus0: apid 2 (application processor)
cpu2: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu2: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu3 at mainbus0: apid 3 (application processor)
cpu3: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu3: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu4 at mainbus0: apid 4 (application processor)
cpu4: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu4: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu5 at mainbus0: apid 5 (application processor)
cpu5: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu5: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu6 at mainbus0: apid 6 (application processor)
cpu6: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu6: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
cpu7 at mainbus0: apid 7 (application processor)
cpu7: QEMU Virtual CPU version 2.5+ ("GenuineIntel" 686-class) 4.20 GHz, 06-06-03
cpu7: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE,SSE2,HTT,SSE3,HV,PERF,MELTDOWN
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
"ACPI0006" at acpi0 not configured
"PNP0A03" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpicmos0 at acpi0
"ACPI0010" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
acpicpu4 at acpi0: C1(@1 halt!)
acpicpu5 at acpi0: C1(@1 halt!)
acpicpu6 at acpi0: C1(@1 halt!)
acpicpu7 at acpi0: C1(@1 halt!)
bios0: ROM list: 0xc0000/0x9a00 0xca000/0xe00 0xcb000/0x2400! 0xe8800/0x7800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 102400MB, 209715200 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: 1 queue, address 52:54:00:12:34:56
virtio0: apic 0 int 11
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
nvram: invalid checksum
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (15fcee4bbaf827d5.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
fd0 at fdc0 drive 1: density unknown

usbdevs:
usbdevs: no USB controllers found


-- 
wbr, Kirill