iwi fatal error
[email protected] Wed, 17 Jun 2026 21:00:38 -0400 (EDT)
| Newsgroups | gmane.os.openbsd.bugs |
|---|---|
| Message-ID | <[email protected]> |
>Synopsis: iwi fatal error message repeat regularly >Category: iwi fatal error reported in dmesg >Environment: System : OpenBSD 7.9 Details : OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC Architecture: OpenBSD.i386 Machine : i386 Hardware: Thinkpad X40 >Description: many iwi fatal error reported in dmesg This has happened as long as I've been using this system, on an off for years, through many upgrades. System still seems to work O.K., although a bit delayed at time. iwi0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 lladdr 00:13:ce:ae:5b:67 index 2 priority 4 llprio 3 groups: wlan egress media: IEEE802.11 autoselect status: active ieee80211: join OTTERHOLE chan 1 bssid 64:d1:54:34:bf:f2 -39dBm wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp inet 192.168.33.66 netmask 0xffffff00 broadcast 192.168.33.255 OTTERHOLE AP is Mikrotik # arp -a router2 64:d1:54:34:bf:ee iwi0 17m11s # fw_update -n fw_update: add none; update none; keep intel,inteldrm,iwi dmesg|grep iwi iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: timeout waiting for master iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error iwi0: timeout waiting for master iwi0: fatal firmware error iwi0: fatal firmware error # 1111 lines deleteD >How-To-Repeat: enable iwi0 >Fix: disable iwi0 dmesg: OpenBSD 7.9 (GENERIC) #329: Wed May 6 14:56:46 MDT 2026 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC real mem = 1600536576 (1526MB) avail mem = 1553416192 (1481MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 06/15/05, BIOS32 rev. 0 @ 0xfd740, SMBIOS rev. 2.33 @ 0xe0010 (56 entries) bios0: vendor IBM version "1UETB6WW (1.66 )" date 06/15/2005 bios0: IBM 2371K3U acpi0 at bios0: ACPI 3.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC BOOT acpi0: wakeup devices LID_(S3) SLPB(S3) PCI0(S3) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) USB2(S3) AC9M(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz, 06-0d-08, patch 00000020 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PCI1) acpiprt2 at acpi0: bus -1 (DOCK) acpibtn0 at acpi0: LID_(wakeup) acpibtn1 at acpi0: SLPB(wakeup) "PNP0A03" at acpi0 not configured acpicmos0 at acpi0 "PNP0303" at acpi0 not configured "IBM3780" at acpi0 not configured acpibat0 at acpi0: BAT0 model "IBM-92P1080" serial 1150 type LION oem "SANYO" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0: version 1.0 acpicpu0 at acpi0: C1 (unknown FFH class 0): !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(@1 halt!), PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 acpitz0 at acpi0 acpitz0: critical temperature is 95 degC acpidock0 at acpi0: GDCK not docked (0) acpidock1 at acpi0: MDCK not docked (0) acpivideo0 at acpi0: VID_ bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000 0xcd800/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0: Enhanced SpeedStep 1496 MHz: speeds: 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02 "Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured inteldrm0 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xe0000000, size 0x8000000 inteldrm0: apic 1 int 16, I85X, gen 2 "Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 1 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 1 int 18 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci1 at ppb0 bus 2 2:0:0: mem address conflict 0xb0000000/0x1000 cbb0 at pci1 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: apic 1 int 16 sdhc0 at pci1 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: apic 1 int 17 sdhc0: SDHC 1.00, 33 MHz base clock sdmmc0 at sdhc0: 4-bit em0 at pci1 dev 1 function 0 "Intel 82541GI" rev 0x00: apic 1 int 20, address 00:0a:e4:3b:75:d3 iwi0 at pci1 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 21, address 00:13:ce:ae:5b:67 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HITACHI_DK13FA-40B> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: apic 1 int 17 iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2100CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: apic 1 int 17, ICH4 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (f91736bc3146469c.a) swap on wd0b dump on wd0b WARNING: / was not properly unmounted WARNING: clock gained 14 days WARNING: CHECK AND RESET THE DATE! inteldrm0: 1024x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) iwi0: fatal firmware error iwi0: fatal firmware error iwi0: fatal firmware error usbdevs: Controller /dev/usb0: addr 01: 8086:0000 Intel, EHCI root hub high speed, self powered, config 1, rev 1.00 driver: uhub3 Controller /dev/usb1: addr 01: 8086:0000 Intel, UHCI root hub full speed, self powered, config 1, rev 1.00 driver: uhub0 Controller /dev/usb2: addr 01: 8086:0000 Intel, UHCI root hub full speed, self powered, config 1, rev 1.00 driver: uhub1 Controller /dev/usb3: addr 01: 8086:0000 Intel, UHCI root hub full speed, self powered, config 1, rev 1.00 driver: uhub2