wsdisplay_console_initted assert on 712/100 and Oct 24 snapshot

I know the October 24 snapshot is old but I just came arround to
test it on my HP 712/100.

It assert in wsdisplay_console_initted.

I don't a have cross-compile setup for hppa so I didn't actually try
a newer -current. But I'm willing to try again with the next available
snapshot.

Yeah, this is all typed by hand, typo could have occur.

[I also had problem with getting the dmesg. "e/s *msgbufp" worked
but ddb_more had too many lines in one page and the text disappeared
at the top. That's why I used boot -c. Is there a way to change the
number of lines displayed in ddb_more?]

dmesg:

>> OpenBSD/hppa BOOT 0.7
boot> boot -c
booting lf0a:/bsd: 1552384+57344+258048 [60640+65486]=0x46bcb4 start=0x80000
PDC_CACHE_SETCS: 0, 0, 0, 0 (-2)
SPID bits: 0x0, error = -2
pmap_bootstrap(0x4ae000)
vtop: 0x20000 @ 0x4af000
physpool: 0x205000 @ 0x1fb000
bootstrap: mapped 0x400000 - 0x1d5000
pdc_coproc: c0, c0
[ bsd ELF sympbol table not valid: bad magic ]
[ using 126128 bytes of bsd a.out symbol table ]
pdc0: console init
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2002 OpenBSD. All rights reserved. http://wwww.OpenBSD.org

pmap_init()
OpenBSD 3.2-current (SHEPHERD_PIE) #741: Thu Oct 24 08:13:11 EDT 2002
    [email protected]:/export/hppa/root/sys/arch/hppa/compile/SHEPHERD_PIE
HP9000/712/100 (King Gecko) PA-RISC 1.1e
real mem = 67108864 (524288 reserved for PROM, 4194304 used by OpenBSD)
avail mem = 53637120
using 1630 buffers containing 6676480 bytes of memory
User Kernel Config
UKC> quit
Continuing...
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
mem0 at mainbus0 offset ffbf000: viper rev0, size 64MB
cpu0 at mainbus0 offset ffbe000 irq 31: PCXL L1-A 100MHz, FPU PCXL (CMOS-26B) rev 1
cpu0: 128K(32b/l) Icache, 128K(32b/l) wr-back coherent Dcache, 64 coherent TLB, 8 BTLB
lasi0 at mainbus0 offset 100000 irq 28: rev 3.0
gsc0 at lasi0
"PS/2 port" at gsc0 (type a, sv 84) offset 8100 not configured
"PS/2 port" at gsc0 (type a, sv 84) offset 8000 not configured
"floppy controller" at gsc0 (type a, sv 83) offset a000 not configured
"Advanced audio (ext.)" at gsc0 (type a, sv 7b) offset 4000 not configured
lpt0 at gsc0 offset 2000 irq 7
com0 at gsc0 offset 5000 irq 5: ns16550a, 16 byte fifo
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v1.0, address 00:60:b0:20:82:1e
osiop0 at gsc0 offset 6000 irq 9: target 7, NCR53C710 processor @ 40MHz
osiop0: id 7 reset V2
scsibus0 at osiop0: 8 targets
osiop0: target 4 now synchronous, period=100ns, offset=8
sd0 at scsibus0 targ 4 lun 0: <SEAGATE, ST32151N, HP02> SCSI2 0/direct fixed
sd0: 2048MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sec, 4194685 sec total
sti0 at mainbus0 offset 8000000 irq 12: HPA208LC640 rev 8.04;7
sti0: 2048x1024 frame buffer, 640x480x8 display, offset 0x0
sti0: 8x16 font type 1, 16 bpc, charset 0-255
wsdisplay0 at sti0panic: kernel diagnostic assertion "wsdisplay_console_initted" failed: file
"/export/hppa/root/usr/src/sys/arch/hpppa/compile/SHEPHERD_PIE/../../../../dev/wscons/wsdisplay.c",
line 690
Stopped at      Debugger+0x18:  break   0,5
RUN AT LEAST blabla
DO NOT blabla
ddb>

trace:

ddb> trace
Debugger(c3f34,0,46c16c.158) at Debugger+0x18
panic(c3e5c,1b15e0,1b1fdc,1b15ec) at panic+0xe4
panic(409474,1b1ef0,409488,475818) at panic+0xc8
__assert(410368,f8100000,c0036238,3) at __assert+0x40
wsdisplay_common_attach(bcf58,c011f014,c0126814,31e0) at wsdisplay_common_attach+0x78
wsdisplay_emul_attach(f0081000,f0080000,f0080000,c0126914) at wsdisplay_emal_attach+0x4c
config_attach(90958,4757e4,8,4) at config_attach+0x1d0
config_found_sm(1c7954,c,46c16c,f8) at config_found_sm+0x64
sti_attach_common(bcf58,c0126814,c0121fd4,2dd0) at sti_attach_common+0x235c
sti_sgc_attach(40ad48,1c7960,40ad30,4753c8) at sti_sgc_attach+0x14c
config_attach(c0122f94,bd000,bd000,bd000) at config_attach+0x1d0
config_found_sm(1c76f8,fff80000,0,3fff) at config_found_sm+0x64
pdc_scanbus(bcf4c,c0121fd4,50,40) at pdc_scanbus+0x214
mbattach(c4810,400,709e20,7091c4) at mbattach+0x1bc
config_attach(400,709e20,7091c4,0) at config_attach+0x1d0
config_rootfound(a49e4,0,46c16c,0) at config_rootfound+0x80
cpu_configure(0,0,0,0) at cpu_configure+0x3c
main(0,0,0,0) at main+0x130
$callmain+0x8:
ddb>


-- 
Hugo Villeneuve <[email protected]>
http://EINTR.net/