latest snapshot 712/60

WARNING: PDC_COPROC error -3
[ using 204424 bytes of bsd ELF symbol table ]
pdc0: console init
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org

pmap_init()
OpenBSD 3.2-current (GENERIC) #1212: Tue Jan 14 14:59:10 EST 2003
    [email protected]:/export/hppa/root/sys/arch/hppa/compile/GENERIC
HP9000/712/60 (Gecko) PA-RISC 1.1f
real mem = 100663296 (524288 reserved for PROM, 4194304 used by OpenBSD)
avail mem = 81846272
using 8600 buffers containing 10035200 bytes of memory
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
mem0 at mainbus0 offset ffbf000: viper rev 0, ctrl 400 >> 408<core_prf>,  size 96MB
cpu0 at mainbus0 offset ffbe000 irq 31: PCXL L1-A 60MHz, 
cpu0: 32K(32b/l) Icache, 32K(32b/l) wr-back coherent Dcache, 120 coherent TLB, 8 BTLB
lasi0 at mainbus0 offset 100000 irq 28: rev 3.0
gsc0 at lasi0
"PS/2 port" at gsc0 (type a, sv 84) offset 8100 not configured
"PS/2 port" at gsc0 (type a, sv 84) offset 8000 not configured
"floppy controller" at gsc0 (type a, sv 83) offset a000 not configured
"Advanced audio (ext.)" at gsc0 (type a, sv 7b) offset 4000 not configured
lpt0 at gsc0 offset 2000 irq 7
com0 at gsc0 offset 5000 irq 5: ns16550a, 16 byte fifo
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v1.0, address 08:00:09:3b:1c:7e
osiop0 at gsc0 offset 6000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets
osiop0: target 6 using Synchronous (25 offset 4866412 period) data transfers
probe(osiop0:6:0): Sense Error Code 0
sd0 at scsibus0 targ 6 lun 0: <SEAGATE, ST34371W, 0860> SCSI2 0/direct fixed
sd0: 4095MB, 5899 cyl, 10 head, 142 sec, 512 bytes/sec, 8388315 sec total
probe(osiop0:6:1): Sense Error Code 0
probe(osiop0:6:2): Sense Error Code 0
probe(osiop0:6:3): Sense Error Code 0
probe(osiop0:6:4): Sense Error Code 0
probe(osiop0:6:5): Sense Error Code 0
probe(osiop0:6:6): Sense Error Code 0
probe(osiop0:6:7): Sense Error Code 0
sti0 at mainbus0 offset 8000000 irq 12: HPA208LC1280 rev 8.04;7
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 8x16 font type 1, 16 bpc, charset 0-255
biomask 0x7 netmask 0xf ttymask 0x3f
root device? : sd0a
swap device (default sd0b): 
root on sd0a swap on sd0b
rootdev=0x400 rrootdev=0xa00 rawdev=0xa02
init: copying out path `/sbin/init' 11